site logo

Three methods for maintenance of industrial chillers

Three methods for maintenance of ftohës industrialë

1. Cleaning and cleaning of industrial chillers:

The cleaning and cleaning of industrial water chillers must first be carried out within a certain period, and it must not be done rashly, otherwise it will affect the normal production of the enterprise and the supply of cold capacity of the industrial water chiller.

The cleaning and cleaning of industrial chillers must also be registered. Every cleaning and cleaning should be registered, indicating the person responsible, and the time, frequency and cycle of cleaning and cleaning. Register the problems that occur to ensure that they can be grasped when the industrial chiller fails in the future.

 

2. The amount of refrigerant in industrial chillers:

To ensure the normal operation of industrial chillers, it is necessary to ensure that the “quantity” of the refrigerant is normal. There are problems with the amount of refrigerant being too much or too little. When the refrigerant pipeline leaks, the amount of refrigerant will decrease. , Which in turn leads to refrigeration problems and excessive refrigerant volume. Many people do not know that the manufacturer will add refrigerant when the refrigerator leaves the factory. Therefore, after purchasing, they often add refrigerant before use. Will cause too much refrigerant.

 

3. Industrial chiller cooling system:

The cooling system is the top priority of industrial chillers. Therefore, whenever it comes to the maintenance of industrial chillers, one has to talk about the cooling system of the chiller.

The air-cooling system is relatively simple. It is enough to clean the fan regularly, check the fan speed, lubricate, and clean the dust. The water-cooling system is more complicated. The cooling water quality should be controlled, the circulating water pipeline should be avoided, and the normal operation of the cooling water tower should be ensured. Ensure the normal use of fillers and water distributors to avoid clogging, and should focus on checking whether the circulating water pump is working properly, whether it is reversed, whether its head meets actual needs, and so on.