Mochini o moholo oa ho thatafatsa likoloi

Lisebelisoa tsa lisebelisoa tsa mochini o moholo oa ho thatafatsa likoloi

Kaha matla a phepelo ea motlakase a batla a le manyane, ho lekane ho sebelisa li-pulses tse 6, mme li-harmoniki tsa eona ho gridi ea motlakase li ke ke tsa feta maemo. Molao-motheo oa potoloho e kholo o bonts’itsoe setšoantšong se ka tlase.

(2) Potoloho ea taolo e na le dijithale ka botlalo ebile e kopantsoe, ‘me ha ho na taolo ea taolo ea lesokoana, e netefatsang ts’epahalo le bokhoni ba ho thibela tšitiso ea sesebelisoa:

(3) Tlhahiso ea motlakase e sa feleng e ka netefatsa matla a phahameng

(4) Na babatsehang tshusumetso mojaro hanyetsa

(5) Phethahetseng le e ka tšeptjoang tšireletso ea mosebetsi

Setsi sena sa taolo se na le mehato e fapaneng ea ts’ireletso e joalo ka ho tlola holimo, ho tlallisa metsi ka bongata, khaello ea motlakase, khaello ea karolo, ho hloka taolo ea phepelo ea motlakase, khatello ea metsi a pholileng le mocheso o phahameng oa metsi o pholileng.

(6) Mokhahlelo o tsoetseng pele oa tatellano ea boithati

(7) Khokahano e ngata ea taolo ea kantle

(8) Bonolo le e bonolo debugging le tlhokomelo

(9) Ho sebetsa habonolo, bula feela konopo ho bulela mochini.

(10) Voltage le tsamaiso ea hajoale ea PID e koetsoeng habeli e koetsoeng habeli.

(11) Mokhoa o pholileng: ho pholisa metsi. Khatello ea metsi e lipakeng tsa 1.5-2Kgf / cm3, pholileng e tšepahalang (lekala ka leng le na le ts’ireletso ea mocheso). Liphaepe tsohle tse pholisang thepa li hokahane ka lipompo tsa tšepe tse sa hloekang, tse lokelang ho ba bonolo ebile li potlakele ho kenya le ho qhaqholla. Potoloho ea metsi e ajoa ka bongata, ‘me tanka ea metsi e pholileng e entsoe ka tšepe e sa hloekang. Bophahamo ba tlhomamiso ke limithara tse 1.5 hole le tlase ea kabati.

Netefatsa hore gridi ea motlakase ea fetoha: 12 V ± 380% e ka sebetsa ka mokhoa o tloaelehileng

(14) Phanele ea lisebelisoa e na le mohala o kenang oa voltmeter, maqhubu a maqhubu a mahareng, voltmeter ea mahareng, mitha ea maqhubu a mahareng le mitha ea motlakase

(15) Litekanyetso tsa tekheniki ea capacitor le maqhubu a mahareng a phetoho li tsamaisana le phepelo ea motlakase ea mahareng. Capacitor e amohela capacitor eohle ea lifilimi e hlahisitsoeng Guilin (theknoloji ea Amerika).

(16) Khabinete ea motlakase e sebelisa mokhoa o tiisitsoeng, mme ho na le mabone a fluorescent bakeng sa tlhokomelo kahare, hape ho na le masoba a koaloang bakeng sa ho kenella ka terata ka holimo le tlase, mme mamati a ka pele le a ka morao a na le mabanta a tiisang.

(17) Thapo e amohela mohala o pholileng oa metsi, ‘me phaephe e amohela tube e matla e hatellang.

(18) Matšoao a fapaneng a supang a ts’oeroe ka li-rivets.

(19) Matla a ho koala le ho mamella motlakase, motlakase o kaholimo oa potoloho (khetla) ha o tlase ho 1M

Tlhaloso ea sebopeho sa phetoho ea maqhubu a mahareng:

Sesebelisoa sa maqhubu a mahareng se sebelisa mofuta o mocha oa mofuta oa (PR mofuta), ‘me konokono ea transformer e entsoe ka maqephe a 0.2-0.35mm a phahameng haholo a lumellang tšepe (maqephe a 3K). Likhoele li lemalitsoe ka mokhoa o kopaneng. The karo-karolelano fapana haholo. Mahlakore a mantlha le a mahareng a ka fetoloa ho latela E hloka ho kopanngoa ka mokhoa o ikhethileng hore e be o makatsang ebile o fetola likarolo, mme mojaro oa maemo o matla. Bobeli coil ea transformer le mokokotlo oa tšepe li na le potoloho e pholileng ea metsi.

Sebelisa maemo a mochini o moholo oa ho thatafatsa likoloi

Phepelo ea motlakase: 3Ф 380V ± 10% 50HZ ea mekato e meraro ea terata

2. Ambient mocheso: 5-35 ℃

3. Bophahamo: e ka tlase ho kapa e lekana le 1000M

Mongobo o amanang: <4%

5. Ho futhumatsa metsi ho potoloha: khatello ea metsi: 0.15-0.3Mpa

6. Ha ho lerōle conductive le khase e senyang