- 23
- Feb
Pipe ea lebota la epoxy glass fiber
Pipe ea lebota la epoxy glass fiber
Mekhahlelo ea mantlha ea pipe ea lebota la epoxy glass fiber:
1: Winding angle, 45~65 (leqhubu la matsoelintsoeke le ka fetoloa ho latela litlhoko tse fapaneng ho fihlela litlhoko tse ntle tsa ts’ebetso ea mochini);
2: Likahare tsa fiber (karolelano ea boima), 70~75%;
3: Boima, 2.00 g/cm3;
4: Sekhahla sa ho monya metsi, ka tlase ho 0.03%;
5: Coefficient ea katoloso ea mocheso oa Axial, 1.8 E-05 1/K;
6: Khalase phetoho mocheso, 110~120 ℃;
7: Ho hanyetsa lik’hemik’hale. Oli ea diminerale: e ntle haholo;
8: Hlakola le ho hlapolla acid: e ntle haholo;
9: Tensile modulus ea elasticity, axial 14000 MPa;
10: Matla a thata; axial 280 MPa; circumferential 600 MPa;
11: Matla a ho kuta: 150 MPa;
12: Matla a Flexural: 350 MPa ka tataiso ea axial;
13: Matla a hatellang: axial 240 MPa;
14: Tumello e amanang le eona 2-3.2;
15: Dielectric loss factor 0.003-0.015;
16: Matla a ho ntša karolo e itseng ≤5;
17: Matla a insulation: axial 3~6 kV; mahlaseli 10~12 kV;
18: Tšusumetso ea lehalima: 110 KV
19: Tšabo ea maqhubu a matla: 50 KV;
20: Kereiti ea ho hanyetsa mocheso: B, F, H kereiti
21: bophara ba ka hare> 5mm; bophara ba ka ntle <300mm; bolelele <2000mm.
环氧玻璃纤维穿墙管
环氧玻璃纤维穿墙管基本参数:
1:缠绕角 ,45~65(可以根据不同要求调整缠绕的角度來达到更好力学性能要求);
2: 纤维含量(重量比), 70~75% ;
3:密度, 2.00 g/cm3;
4:吸水率, 小于0.03% ;
5:轴向热膨胀系数 ,1.8 E-05 1/K ;
6:玻璃转化温度 ,110~120 ℃;
7:耐化学性能 矿物油:极好;
8:溶剂及稀酸:优 ;
9:抗拉弹性模量,轴向 14000 MPa ;
10:抗拉强度;轴向 280 MPa;环向 600 MPa;
11:抗剪强度 :150 MPa ;
12:抗弯强度: 轴向 350 MPa ;
13:抗压强度:轴向 240 MPa;
14:相对介电常数 2-3.2 ;
15:介质损耗因数 0.003-0.015 ;
16:局部放电量 ≤5 ;
17:绝缘强度: 轴向 3~6 kV ;径向 10~12 kV;
18:雷电冲击: 110 KV
19:工频冲击: 50 KV ;
20: 耐热等级:B,F,H级
21: 内径 >5mm;外径 <300mm;长度<2000mm.
Pipe ea lebota la epoxy glass fiber
Mekhahlelo ea mantlha ea pipe ea lebota la epoxy glass fiber:
1: Winding angle, 45~65 (leqhubu la matsoelintsoeke le ka fetoloa ho latela litlhoko tse fapaneng ho fihlela litlhoko tse ntle tsa ts’ebetso ea mochini);
2: Likahare tsa fiber (karolelano ea boima), 70~75%;
3: Boima, 2.00 g/cm3;
4: Sekhahla sa ho monya metsi, ka tlase ho 0.03%;
5: Coefficient ea katoloso ea mocheso oa Axial, 1.8 E-05 1/K;
6: Khalase phetoho mocheso, 110~120 ℃;
7: Ho hanyetsa lik’hemik’hale. Oli ea diminerale: e ntle haholo;
8: Hlakola le ho hlapolla acid: e ntle haholo;
9: Tensile modulus ea elasticity, axial 14000 MPa;
10: Matla a thata; axial 280 MPa; circumferential 600 MPa;
11: Matla a ho kuta: 150 MPa;
12: Matla a Flexural: 350 MPa ka tataiso ea axial;
13: Matla a hatellang: axial 240 MPa;
14: Tumello e amanang le eona 2-3.2;
15: Dielectric loss factor 0.003-0.015;
16: Matla a ho ntša karolo e itseng ≤5;
17: Matla a insulation: axial 3~6 kV; mahlaseli 10~12 kV;
18: Tšusumetso ea lehalima: 110 KV
19: Tšabo ea maqhubu a matla: 50 KV;
20: Kereiti ea ho hanyetsa mocheso: B, F, H kereiti
21: bophara ba ka hare> 5mm; bophara ba ka ntle <300mm; bolelele <2000mm.