Kariya ga masonry na rotary kiln

Yawan aiki na kiln rotary (kiln ciminti) yana da dangantaka mai kyau tare da ingancin masonry na tubali. Dole ne a gina shi a hankali daidai da buƙatun fasaha na masonry bulo. Abubuwan bukatu na musamman sune kamar haka:

1. Ya kamata a tsaftace fata na cellar da ke ɗaure da bulo kafin a gina shi, musamman ma wurin da aka sanya katako mai murabba’i ya zama mai laushi kamar yadda zai yiwu.

2. Ƙaddamar da shinge na bulo a cikin kwatancen kwance da madaidaiciya tare da dunƙule da katako mai murabba’i; bayan kayyade sashin da ake buƙatar maye gurbin, yi amfani da dunƙule da itacen murabba’i don ƙarfafa sauran ɓangaren.

3. Lokacin cire tsofaffin tubalin daga ramin, kula da kare shingen bulo don hana zamewar ragowar bulo. Bayan ƙin yarda, ƙaramin farantin karfe yana welded zuwa silinda don hana rufin bulo daga zamewa.

4. Kafin a gina tubalin tubali, harsashi na cellar ya kamata a duba sosai kuma a hankali don tsaftace ɗakin.

5. Lokacin gini, ko wace hanya aka yi na ginin ginin, dole ne a gina ginin katafaren ginin, kuma an haramta shi sosai ba tare da shimfida layin ba. Zana layin kafin a shimfiɗa tubalin da ke jujjuyawa: za a sanya layin tushe na cellar tare da kewayen 1.5m, kuma kowane layi zai kasance daidai da axis na cellar; Za a sanya layin nunin madauwari kowane 10m, kuma layin madauwari ya zama iri ɗaya. Ya kamata a layi daya da juna da perpendicular zuwa ga axis na cellar.

6. Abubuwan da ake buƙata don yin bulo a cikin cellar sune: rufin bulo yana kusa da harsashi na cellar, tubalin da tubalin dole ne su kasance masu tsauri, tubalin tubalin dole ne su kasance madaidaiciya, tsaka-tsakin dole ne ya zama daidai, tubalin dole ne a kulle da kyau. a cikin matsayi mai kyau, ba tare da raguwa ba, kuma ba faduwa ba. A takaice dai, wajibi ne a tabbatar da cewa tubalin da aka yi amfani da su da kuma jikin cellar suna da abin dogara a lokacin aiki na cellar, kuma dole ne a rarraba damuwa na tubali na tubali a kan dukan rufin cellar kuma a kan kowane tubali.

7. Hanyoyi na yin tubali sun kasu kashi biyu: ginshiƙan zobe da masonry mai tsauri. Sabbin cellars da silinda an daidaita su da kyau kuma nakasar ba ta da tsanani. Ana amfani da masonry na zobe gabaɗaya; nakasar Silinda ya fi tsanani kuma tubalin da aka yi amfani da su ba su da kyau. A cikin cellar, za a iya amfani da hanyar masonry mai tsauri a cikin babban bulo na alumina da ɓangaren bulo na yumbu.

8. Lokacin da aka sanya zobe, an ba da izinin karkatar da zobe zuwa ƙasa ya zama 2mm a kowace mita, kuma an yarda da tsawon sashin ginin ya zama har zuwa 8mm. Lokacin da aka yi tagulla, ana ba da izinin karkata a tsaye a kowace mita ya zama 2mm, amma matsakaicin tsayin da za a iya yarda da duka zoben shine 10mm.

9. Tuba na ƙarshe na kowane da’irar (sai dai da’irar ta ƙarshe) ana tura shi daga gefen shingen bulo (a cikin hanyar axis na cellar mai juyawa) don kammala duk da’irar masonry, kuma kula da daidaitawa. nau’in bulo kamar yadda zai yiwu kada a yi amfani da shi. Busassun busassun faranti na haɗin gwiwa sun kasance 1-1.2mm gabaɗaya, kuma faɗin farantin karfe yakamata ya zama kusan 10mm ƙasa da faɗin bulo.

10. Bayan an ƙera tubalin da za a cire, duk tubalin da aka rufe ya kamata a tsaftace kuma a ɗaure su sosai. Ba shi da kyau a canja wurin cellar bayan an gama ɗaure. Ya kamata a kunna shi cikin lokaci kuma a gasa shi bisa ga bushewar cellar.