Karfe bututu shigowa dumama tanderu

A, Karfe bututu dumama tanderu:

Dangane da buƙatun fasaha na mai siye, murhun wutar lantarki na bututun ƙarfe da muke buƙatar samarwa ya haɗa da samar da wutar lantarki na matsakaicin mitar 1, 1 diyya capacitor majalisar da 1 dumama tanderun jiki.

Yanayin tsari da sigogin fasaha na tanderun bututun ƙarfe na ƙarfe:

1. Zazzabi mai zafi: 900℃～1000℃

2. Girman waje na bututun ƙarfe: Diamita na waje: Φ350mm, kauri bango 8-16mm;

Selection Hanyar karfe tube dumama makera fasaha

B. Matsakaicin mitar wutar lantarki yana ɗaukar halaye na sabon matsakaicin mitar wutar lantarki wanda kamfaninmu ya haɓaka.

1. Alamomin fasaha:

1.1, ƙimar nasarar farawa na iya kaiwa 100%

1.2. Matsalolin wutar lantarki da aka gyara ya fi ko daidai da 0.92

1.3. Tare da yanayin yanayin zafi, ana iya gane sarrafa madauki na zafin jiki

1.4, tare da juyawa na ciki da na waje da aikin juyawa ta atomatik

1.5. Duk dijital, babu madauki na sarrafa relay, ta yadda tsarin ke gudana a tsaye da dogaro

1.6. Yana da cikakken kariya kamar overcurrent, overvoltage, undervoltage, rashin lokaci, matsa lamba na ruwa, ruwan zafi, da dai sauransu, don tabbatar da cewa duk wani gazawar ba zai lalace ba.

2. Fasalolin fasaha:

2.1, matsakaicin wutar lantarki

2.1.1 Ka’idar babban da’ira na matsakaicin wutar lantarki:

Saboda ƙarfin wutar lantarki na tsaka-tsaki yana da ƙananan ƙananan, ya isa ya yi amfani da igiyoyin bugun jini 6, kuma masu jituwa da grid ɗin wutar lantarki ba zai wuce misali ba. An nuna ka’idar babban kewayawa a cikin hoton da ke ƙasa.

C, Hanyar zaɓi na induction tanderu jikin karfe bututu dumama makera

Domin a wasu lokuta ya zama dole don maye gurbin inductor na musamman daban-daban lokacin dumama bututun ƙarfe. Mun yi la’akari sosai da sauƙi na sauyawa mai sauri a cikin samar da firikwensin.

An tsara tanderun dumama tare da kafaffen sashi wanda za’a iya daidaitawa sama da ƙasa. Ta hanyar gyare-gyaren mai ɗaukar tsutsotsi na hannu, yana yiwuwa a gane cewa tsakiyar layin wutar lantarki na ƙayyadaddun ƙayyadaddun bayanai suna daidai da tsayi. Yana iya yadda ya kamata tabbatar da cewa karfe bututu smoothly wuce ta inductor ba tare da buga jikin tanderu.

Canjin haɗin gwiwa mai sauri na hanyar ruwa

Don sauƙaƙe aikin, ana amfani da haɗin kai mai saurin canzawa a cikin ƙirar bututun ruwa, kamar yadda aka nuna a cikin adadi na dama na sama. Kayansa shine bakin karfe 316. An yafi hada da threaded connector, tiyo connector, runguma wuyan hannu, sealing gasket, da dai sauransu Babban alama na irin wannan sauri-canji hadin gwiwa shi ne: da threaded connector da kuma tiyo connector za a iya matching juna, da fastened rike yana da sauki ga. aiki, kuma aikin rufewa yana da kyau.

Rufin wuta

Rufin tanderu yana ɗaukar siliki carbide ko hanyar kulli na haɗin gwiwa. Zafin sabis yana sama da 1450 ℃. Yana da kyawawa mai kyau, zafi mai zafi, juriya da juriya da tasiri.

Yanayin aiki na karfe bututu dumama makera

Matsakaicin mitar wutar lantarki: 380V± 10% 50HZ

Da ake bukata iya aiki na transformer: 500KW: 600KVA iya aiki

1000KW: 1200KVA iya aiki

Lokacin isar da wutar lantarki ta bututun ƙarfe: Za a kammala shi a cikin kwanaki 45 bayan kwangilar ta fara aiki.

Haɗin kai da faɗar tanderun bututun ƙarfe: