SD-160 Intermediate Frequency Forging Furnace

1. Babban kayan aiki:

(1) SD-160 tsaka-tsakin wutar lantarki

(2) capacitor na diyya da teburin makera

(3) murfin shigarwa, dogo mai jagora da murfin waje

(4) Tsarin ciyar da huhu

2. Matsakaicin shigar da shigar: 160KW

3. Mitar saurin juyawa: 1-20KHZ

4. Input ƙarfin lantarki: uku-lokaci 380V 50 ko 60HZ

5. Load duration: 100%

6. Buƙatun ruwan sanyi: ≥0.2MPa, ≥30L/min

7. Dumama iya aiki (KG/min)

(1) Steel to 1000°C: 5.7KG

(2) Copper to 700℃: 8KG

8. Girman tebur: Tsawon mita 1.6 × mita 0.7 a fadin × 0.89 mita a tsayi

9. Nauyin ƙirar makera: 260KG

10. Ana amfani dashi don ci gaba da dumama kayan monolithic kamar ƙarfe, jan ƙarfe, aluminium, da sauransu.

main application:

The intermediate frequency monolithic heating furnace is used for continuous diathermy of regular round bars of steel, stainless steel, copper, aluminum, etc., such as steel, stainless steel, copper, aluminum, etc. above Φ12, square materials or other shaped rough materials; it is mainly used for continuous heating of the entire material.

aikace -aikace na al’ada:

Ciki har da samar da wutar lantarki na tsaka -tsaki, akwatin capacitor diyya da wurin aiki, murfin shigarwa, injin ciyarwa, da dai sauransu Dangane da buƙatun aikace -aikace daban -daban, yana iya haɗawa da ma’aunin zafi da sanyio na infrared, masu kula da zafin jiki, da ciyarwa da na’urorin murɗawa;

Halaye na tsaka -tsaki mitar monolithic dumama makera:

(1) Yanayin mitar yana da girma, daga 1KHZ zuwa 20KHZ, kuma ana iya zaɓar mitar da ta dace gwargwadon diamita na kayan aikin dumama na musamman.

(2) Lokacin da aka dumama kayan gaba ɗaya a cikin tsaka-tsakin mitar wutar makera, tsayin murfin shigarwar yana da tsawon mita 500mm-1, kuma ana ƙona abubuwa da yawa a lokaci guda, wanda ke tabbatar da tasirin watsa zafi;

(3) Matsakaicin mitar monolithic dumama wutar lantarki tana ɗaukar yanayin dumama mai ɗorewa, kuma nauyin da ke cikin murfin shigarwar yana da daidaituwa, wanda ke shawo kan kayan aikin da babban canjin kaya ke haifar lokacin da nauyin mashaya ɗaya ya tashi daga zafin jiki zuwa 1100 ° C a lokacin dukan dumama tsari. Babban canji a cikin ainihin ƙarfin dumama yana tabbatar da cewa ainihin ƙarfin kayan aikin na iya zama sama da 85% na ikon da aka ƙaddara yayin ci gaba da aikin dumama gabaɗaya, kuma ana iya amfani da kayan aiki yadda yakamata.

(4) Lokacin dumama ƙarfe mara ƙarfe kamar jan ƙarfe da aluminium, ainihin ƙarfin kayan aikin na iya zama sama da 85% na madaidaicin iko ta hanyar ƙira mai dacewa da murfin shigarwa da ƙarfin wuta, da ƙarfin dumama 3.5KG/KW • sa’a lokacin dumama tagulla.

(5) Idan aka kwatanta da thyristor tsaka-tsakin mitar wutar lantarki, ba ƙaramin girma bane kuma mai dacewa don kulawa, amma kuma yana iya adana wutar ta 15-20%.

Babban ƙayyadaddun murhun wutar lantarki mai ƙarfi da ƙarfin dumama: