- 06
- Sep
2T induction melting furnace technical configuration selection table
2T induction melting furnace technical configuration selection table
1. 2T induction melting furnace power supply parameter selection table
| ಕ್ರಮ ಸಂಖ್ಯೆ | ಯೋಜನೆಯ | ಘಟಕ | ನಿಯತಾಂಕ | ಟೀಕಿಸು |
| 1 | ಟ್ರಾನ್ಸ್ಫಾರ್ಮರ್ ಸಾಮರ್ಥ್ಯ | KVA | 1500 | 10KV/2*660V / 6phase /50H△/ Ddoyn-11(ONAN) |
| 2 | ಟ್ರಾನ್ಸ್ಫಾರ್ಮರ್ ಪ್ರಾಥಮಿಕ ವೋಲ್ಟೇಜ್ | KV | 10 | |
| 3 | ಟ್ರಾನ್ಸ್ಫಾರ್ಮರ್ ದ್ವಿತೀಯ ವೋಲ್ಟೇಜ್ | V | 660 | |
| 4 | ಸಾಮರ್ಥ್ಯ ಧಾರಣೆ | KW | 1250 | ವಿದ್ಯುತ್ ಸರಬರಾಜು |
| 5 | ರೇಟ್ ಆವರ್ತನ | KHz | 0.5 | |
| 6 | ಡಿಸಿ ವೋಲ್ಟೇಜ್ | V | 830 | |
| 7 | ಐಎಫ್ ವೋಲ್ಟೇಜ್ | V | 1200 | |
| 8 | Induction coil port voltage | V | 2400 | |
| 11 | ರಿಕ್ಟಿಫೈಯರ್ | 12 ದ್ವಿದಳ ಧಾನ್ಯಗಳು | ||
| 12 | ಇನ್ವರ್ಟರ್ | 8 thyristors | ||
| 13 | ವಿದ್ಯುತ್ ಪರಿವರ್ತನೆ ದಕ್ಷತೆ | > 0.95 | ||
| 14 | ವಿದ್ಯುತ್ ಅಂಶ | > 0.92 | Under rated power | |
| 15 | Constant power output time | > 92% | During the melting cycle | |
| 16 | ಆರಂಭಿಕ ಯಶಸ್ಸಿನ ದರ | 100% | ||
| 17 | ಕೆಲಸ ಮಾಡುವ ಶಬ್ದ | dB | ≤85 | 1 ಮೀಟರ್ ದೂರದಲ್ಲಿದೆ |
2. 2T induction melting furnace
| ಕ್ರಮ ಸಂಖ್ಯೆ | ಯೋಜನೆಯ | ಘಟಕ | ನಿಯತಾಂಕ |
| 1 | ರೇಟ್ ಸಾಮರ್ಥ್ಯ | t | 2.0 |
| 2 | Rated working temperature | C | 1600 |
3. The melting rate and melting power consumption of 2T induction melting furnace ,
| ಕ್ರಮ ಸಂಖ್ಯೆ | ಯೋಜನೆಯ | ಘಟಕ | ನಿಯತಾಂಕ |
| 1 | Melting rate (1600 C) | ಟಿ / ಗಂ | 2.0 |
| 2 | Melting power consumption (1600 C) | kwh / t | ≤610 |
. 4, 2T induction melting furnace of the hydraulic system
| ಕ್ರಮ ಸಂಖ್ಯೆ | ಯೋಜನೆಯ | ಘಟಕ | ನಿಯತಾಂಕ |
| 1 | ಹೈಡ್ರಾಲಿಕ್ ಸ್ಟೇಷನ್ ಸಾಮರ್ಥ್ಯ | L | 500 |
| 2 | ಕೆಲಸದ ಒತ್ತಡ | ಎಂಪಿಎ | 10 |
| 3 | ಇನ್ಪುಟ್ ವಿದ್ಯುತ್ | KW | 5.5 |
| 4 | ಕೆಲಸದ ಹರಿವು | L/ min | > 45 |
| 5 | The hydraulic oil supplier provides the model, and the buyer is responsible for the purchase and cost. | ||
5. Technical requirements for supporting facilities of 2T induction melting furnace and special transformers
| ಕ್ರಮ ಸಂಖ್ಯೆ | ಯೋಜನೆಯ | ನಿಯತಾಂಕ |
| 1 | ರೇಟ್ ಸಾಮರ್ಥ್ಯ | 1500KVA |
| 2 | ಪ್ರಾಥಮಿಕ ವೋಲ್ಟೇಜ್ | 10KV±5% 3 phase 50HZ |
| 3 | Secondary voltage | 660 ವಿ * 2 |
| 4 | ಪ್ರಾಥಮಿಕ ಪ್ರವಾಹ | 86.6A |
| 5 | Secondary current | 656A*2 /(660V) |
| 6 | Connection group | Ddo-yn11 |
| 7 | ಪ್ರತಿರೋಧ ವೋಲ್ಟೇಜ್ | UK=6% |
| 8 | ಕೂಲಿಂಗ್ ವಿಧಾನ | ಒನಾನ್ |
| 9 | Pressure regulation method | 3 gears no-excitation manual voltage regulation |
| 10 | Between network side and valve side | Add shielding to reduce the impact of harmonics on the network side |
| 11 | ರಕ್ಷಿಸಲು | Heavy and light gas alarm, overpressure release and high oil temperature alarm |
| 12 | ಇತರ | Low loss, high reliability, low noise, etc. |
| 13 | ವೈಂಡಿಂಗ್ | ತಾಮ್ರದ ಕೋರ್ |
| 14 | Silicon steel sheet | WISCO produces a new oriented silicon steel sheet, model 30Q130. |

