2T induction melting furnace technical configuration selection table

1. 2T induction melting furnace power supply parameter selection table

Ishlab chiqarish raqami	loyiha	birlik	parametrni tanlang	fikr bildirmoq
1	Transformator hajmi	KVA	1500	10KV/2*660V / 6phase /50H△/ Ddoyn-11(ONAN)
2	Transformatorning asosiy kuchlanishi	KV	10
3	Transformatorning ikkilamchi kuchlanishi	V	660
4	nominal quvvat	KW	1250	quvvatlantirish manbai
5	Nominal chastota	KHz	0.5
6	DC kuchlanish	V	830
7	IF kuchlanish	V	1200
8	Induction coil port voltage	V	2400
11	Tekshiruvchi		12 XNUMX zarba
12	inverter			8 thyristors
13	Quvvatni konvertatsiya qilish samaradorligi		> 0.95
14	Quvvat faktor		> 0.92	Under rated power
15	Constant power output time		> 92%	During the melting cycle
16	Ishga tushirish muvaffaqiyat darajasi		100%
17	Ish shovqini	dB	≤85	1 metr masofada

2. 2T induction melting furnace

3. The melting rate and melting power consumption of 2T induction melting furnace ,

. 4, 2T induction melting furnace of the hydraulic system

Ishlab chiqarish raqami	loyiha	birlik	parametr
1	Gidravlik stansiya quvvati	L	500
2	Ish bosimi	Mpa	10
3	kirish kuchi	KW	5.5
4	Work flow	L/ min	> 45
5	The hydraulic oil supplier provides the model, and the buyer is responsible for the purchase and cost.

5. Technical requirements for supporting facilities of 2T induction melting furnace and special transformers

Ishlab chiqarish raqami	loyiha	parametrni tanlang
1	Nominal Imkoniyatlar	1500KVA
2	Birlamchi kuchlanish	10KV±5% 3 phase 50HZ
3	Secondary voltage	660V * 2
4	Birlamchi oqim	86.6A
5	Secondary current	656A*2 /(660V)
6	Connection group	Ddo-yn11
7	Impedance voltage	UK=6%
8	sovutish usuli	ONAN
9	Pressure regulation method	3 gears no-excitation manual voltage regulation
10	Between network side and valve side	Add shielding to reduce the impact of harmonics on the network side
11	saqlash	Heavy and light gas alarm, overpressure release and high oil temperature alarm
12	boshqa	Low loss, high reliability, low noise, etc.
13	Sariqlash	Mis yadrosi
14	Silicon steel sheet	WISCO produces a new oriented silicon steel sheet, model 30Q130.