Several methods to avoid the heat dissipation problem of the машына з паветраным астуджэннем ледзяной вады

First, the fan problem.

Fans may have blade deformation, breakage, and bearing lubrication problems, etc. In addition to bearing lubrication, fans often cannot be repaired and should be replaced in time. In addition, the fan will also have dust problems, which will cause the speed to slow down and the motor load to increase, which will lead to poor heat dissipation. It should be cleaned in time.

Second, the motor problem.

The motor is the driving source and the power source of the air-cooled cooling system. There will also be lubrication problems and self-problems.

Third, the belt problem.

Belt cracks or changes in tightness can also affect the cooling effect of the air cooling system of the air-cooled chiller. Should be checked regularly, if any problem is found, the belt should be replaced in time.

Of course, bearing lubrication and bearing damage can also be said to be the problems of the air cooling system of the air-cooled chiller. However, the bearings often exist on the fan and other parts.

How to avoid these problems?

It’s very simple, you only need to take certain preventive measures according to the root cause of the problem. After discovering problems, such as low cooling efficiency and poor heat dissipation effect, you should check the air cooling system of the air-cooled chiller in time. Maintenance, if it can return to normal afterwards, the problem is solved. If there is still a problem, other problems should be eliminated until the air-cooled ice water machine runs normally.