Katingbanan sa napulo ka sagad nga mga pamaagi sa pagpalong sa taas nga frequency nga makamatay nga makina (1)

1. Single medium (water, oil, air) quenching

Single medium (water, oil, air) quenching: Quenching the workpiece that has been heated to the quenching temperature into a quenching medium to cool it completely. This is a simpler quenching method and is often used for carbon and alloy steel workpieces with simple shapes. The quenching medium is selected according to the heat transfer coefficient, hardenability, size and shape of the parts.

2. Doble nga medium quenching

Dual-medium quenching: The workpiece heated to the quenching temperature is first cooled to the Ms point in the quenching medium of a high-frequency heating machine with strong cooling capacity, and then transferred to the slow-cooling quenching medium to cool to room temperature to achieve different quenching cooling temperatures range, and has an ideal quenching cooling rate. It is used for complex shapes or large workpieces made of high carbon steel and alloy steel, and carbon tool steel is also mostly used in this method. Commonly used cooling media are water-oil, water-nitrate, water-air, oil-air. Generally, water is used as a quick-cooling quenching medium, oil or air is used as a slow-cooling quenching medium, and air is less used.

3. Martensite graded quenching

Martensitic graded quenching: Ang asero mao ang austenitized, ug unya gituslob sa usa ka liquid medium (salt bath o alkali bath) uban sa usa ka temperatura nga gamay nga mas taas o ubos pa kay sa ibabaw nga Martens punto sa asero, gitipigan alang sa usa ka tukma nga panahon, ug sa sulod ug sa gawas. ang mga bahin sa puthaw gitambalan. Human ang layer makaabot sa medium nga temperatura, kini gikuha alang sa pagpabugnaw sa hangin, ug ang supercooled nga austenite hinay-hinay nga giusab ngadto sa usa ka proseso sa pagpalong sa martensite. Kasagaran kini gigamit alang sa gagmay nga mga workpiece nga adunay komplikado nga mga porma ug estrikto nga mga kinahanglanon sa deformation, ug ang high-speed nga asero ug high-alloy steel nga mga himan ug mamatay sagad usab nga mapalong sa kini nga pamaagi.

4. Martensite graded quenching method below Ms point

Martensitic graded quenching method below Ms point: When the bath temperature is lower than the Ms of the workpiece steel and higher than Mf, the workpiece cools faster in the bath, and the same result as the graded quenching can be obtained when the size is larger. Commonly used for larger size low hardenability steel workpieces.

5. Bainite isothermal quenching method

Bainite isothermal quenching method: The workpiece is quenched into a bath with the lower bainite temperature of the steel at an isothermal temperature, so that the lower bainite transformation occurs. Generally, it is kept in the bath for 30~60min. There are three main steps in the bainite isothermal quenching process: ① austenitizing treatment; ② cooling treatment after austenitizing;