Yadda za a zabi injin ƙirƙira?

1. The selection of forging heating furnace is to first pay attention to the heating temperature and determine the material of the heated workpiece. The heating temperature of the heated workpiece of different materials is different, and it must meet the heating process requirements. For example, the heating temperature of alloy steel material is 1200 degrees, the heating temperature of aluminum material is 450 degrees, and the heating temperature of copper alloy material is 1000 degrees. The heating temperature should be determined according to the process requirements.

2. Zaɓin ƙirar ƙirƙira dumama tanderu ya kamata kula da ma’auni na waje na kayan aiki masu zafi. The nauyi na mai tsanani workpieces za a iya ƙaddara ta waje girma, don sanin da zafi tunawa da workpieces mai tsanani ga tsari zafin jiki don kawai ƙayyade dumama ikon. A ka’ida, da siffar da girman da workpiece da za a mai tsanani ne manyan, zagaye sanduna, da kuma m kayan, da kuma mashaya dumama makera tare da babban dangi ikon da low mita ya kamata a yi amfani da; High mita mashaya dumama makera.

3. The selection na ƙirƙira dumama makera ya kamata kula da zurfin da kuma yankin na workpiece dumama. Idan zurfin dumama yana da zurfi, yanki yana da girma, kuma ana yin dumama gabaɗaya, ya kamata a yi amfani da tanderun dumama mashaya tare da babban iko da ƙananan mita; zurfin dumama ba shi da zurfi, yanki yana da ƙananan, kuma ana yin dumama na gida, kuma ya kamata a zaɓi tukunyar dumama mashaya tare da ƙananan ƙarfi da ƙananan mita.

4. The selection of forging dumama makera ya kamata kula da dumama kari na workpiece. The dumama gudun na workpiece bukatar da sauri, da kuma mashaya dumama makera da in mun gwada da babban iko da in mun gwada da high mita ya kamata a zaba.

5. The selection of the forging heating furnace should pay attention to the continuous heating time and the degree of automation, and determine whether it is equipped with automatic feeding and conveying equipment.

6. The selection of forging heating furnaces should pay attention to the connection distance between the induction components and the equipment. The connection is long, and even requires the use of water-cooled cables for connection. The medium frequency induction heating furnace with higher power should be selected relatively.

7. The selection of forging heating furnaces should pay attention to the process requirements. Generally speaking, for processes such as quenching and welding, the relative power can be selected to be smaller and the frequency to be higher. For annealing, tempering and other processes, the relative power should be larger and the frequency to be lower. Some; red punching, hot calcining, smelting, etc., if a process with good heating effect is required, the power should be selected larger and the frequency should be selected lower.