Koje su prednosti gašenja visokofrekventna oprema za kaljenje sebe?

1. The surface of the workpiece is not easy to be oxidized. Because of the heating, the workpiece is easily contacted with oxygen, and the surface is oxidized, which will affect the heating effect of the workpiece. Instead, the high-frequency quenching process will not only cause excessive oxidation, but also the heating speed of the workpiece is fast, which improves the work efficiency, and the workpiece itself is rarely deformed.

2. The standard of the surface hardened layer of the high-frequency quenched workpiece is within 1-1.5mm, which is different from the intermediate frequency quenching. The depth of the hardened layer of the intermediate frequency quenching can reach within 1-5mm, so the intermediate frequency quenching is It is used when high-frequency quenching cannot meet the process requirements. Of course, if it is some workpieces with deeper hardened layers, we use the power-frequency quenching process.

3. Metoda grijanja opreme je bezkontaktno grijanje, koje može brzo zagrijati obradak sa sekundarnom deformacijom.

4. Proces kaljenja izratka može se automatski kontrolirati i može se uskladiti s alatnim strojevima za kaljenje kako bi se postiglo kontinuirano kaljenje, kaljenje segmenata i skeniranje. Ova je metoda vrlo prikladna za neke izratke sa strogim zahtjevima.

5. Proces toplinske obrade opreme za visokofrekventno kaljenje je vrlo jednostavan i jeftin.