Performance parameter table of epoxy glass fiber wound insulation cylinder

Product use: Widely used in the main insulators of high-voltage products such as oil-immersed transformers, H-class dry-type transformers, railway locomotive transformers, on-load tap-changers, reactors, arresters, SF6 transformers, and test devices.

वैशिष्ट्ये:

1. High withstand voltage

2. Low dielectric loss

3. The partial discharge is small

4. उच्च यांत्रिक सामर्थ्य

5. No deformation and no delamination

6. Very low water absorption

7. Chemical resistance (SF6 resistance)

Product specifications: the inner diameter of the insulating cylinder ranges from Φ6mm to Φ2480mm, the wall thickness of the small tube is ≥0.5mm, the wall thickness of the large tube is ≥3mm, the wall thickness of the super-large tube is ≥5mm, and the length is within the length of the core mold. Our company has more than 400 sets of molds ranging from Φ6mm to Φ2480mm. (For specific specifications, please refer to the core mold specification table). Special specifications will be negotiated separately.

ऑर्डर सूचना:

1. All users, please try to apply the existing mandrel specifications, such as the cost and time of redo mandrel.

2. Because the production process has a period of time and the specifications of each user are different, please order in advance.

Performance parameter table of Class H epoxy fiberglass insulation cylinder

नाही	सूचक नाव	आवश्यकता	युनिट	अनुक्रमणिका मूल्य
1	घनता		जी / सेमी 3	1.9-2.0
2	Intensity of bending	पेक्षा कमी नाही	प्रबोधिनीचे	320
3	Pressure resistance strength	पेक्षा कमी नाही	प्रबोधिनीचे	200
4	कतरणे विरोधी शक्ती	पेक्षा कमी नाही	प्रबोधिनीचे	32
5	Medium Loss Factor (50Hz)	No greater than		0.02
6	The dielectric constant			3 ~ 6
7	When the volume resistivity is normal	पेक्षा कमी नाही	Qm	10X1011
7	After immersion	पेक्षा कमी नाही	Qm	10X109
8	When the parallel layer moves toward the normal insulation resistance	पेक्षा कमी नाही	Q	10X1011
8	After immersion	पेक्षा कमी नाही	Q	10X109
9	Surface voltage resistance (Pressure-resistant lmin,30mm in the air)		KV	14
10	Vertical layer direction resistance voltage of 8> 3mm		KV	20
11	Parallel layer-resistant voltage (25mm spacing)	पेक्षा कमी नाही	KV	50
12	इन्सुलेशन प्रतिकार	पेक्षा कमी नाही	MQ	5X104
13	Industrial frequency voltage resistance distance (by customer technology आवश्यकता)	पेक्षा कमी नाही	KV	80
14	उष्णता प्रतिरोध	पेक्षा कमी नाही	° से	180
15	Meverage thermal deformation temperature	पेक्षा कमी नाही	° से	250