Paraan ng pag-install ng pugon ng kapaligiran ng vacuum

Vacuum atmosphere furnaces are now used in many industrial manufacturing in the heating process. For the atmosphere furnace, we should first understand the structure of the atmosphere furnace before operating, in order to have a better operation of the atmosphere furnace, and to deal with various conditions in time during operation. .

The structure of the atmosphere furnace is mainly composed of a furnace frame, a furnace shell, a furnace lining, a furnace door device, an electric heating element and an auxiliary device. The function of the furnace frame is to bear the load of the furnace lining and the workpiece, and usually there are section steel welded into a frame, and the steel plate is covered. The function of the furnace shell of the vacuum atmosphere furnace is to protect the furnace lining, strengthen the structure of the electric furnace and maintain the airtightness of the electric furnace. The steel plate is usually welded on the steel frame. The reasonable design of the furnace frame and the furnace shell has sufficient strength. Let’s take a look at the installation method:

1. Ang vacuum atmosphere furnace ay hindi nangangailangan ng espesyal na pag-install, kailangan lamang itong ilagay sa isang patag na lupa o workbench. Dapat iwasan ng controller ang panginginig ng boses, at ang lokasyon ay hindi dapat masyadong malapit sa electric furnace upang maiwasan ang overheating at ang mga elektronikong bahagi ay hindi maaaring gumana nang normal.

2. Before installing the electric furnace, check whether it is damaged or incomplete due to transportation or other reasons. If it is complete, remove the dirt from the parts first, repair the defects found, and then install it.

3. Ipasok ang thermocouple sa pamamagitan ng couple hole, at punan ang puwang sa pagitan ng couple hole at ang thermocouple ng asbestos rope upang maiwasan ang pagkawala ng init.

4. Suriin kung ang electric heating element ng vacuum atmosphere furnace ay sira, basag, baluktot nang husto, at nahuhulog mula sa mga brick.

5. Mangyaring sumangguni sa wiring diagram sa controller manual para ikonekta ang power cord, electric furnace cord, at compensation wire.

6. After the wire is connected, please follow the procedure below to bake the new vacuum atmosphere furnace before using it for the first time.