安裝方法 真空氣氛爐

Vacuum atmosphere furnaces are now used in many industrial manufacturing in the heating process. For the atmosphere furnace, we should first understand the structure of the atmosphere furnace before operating, in order to have a better operation of the atmosphere furnace, and to deal with various conditions in time during operation. .

The structure of the atmosphere furnace is mainly composed of a furnace frame, a furnace shell, a furnace lining, a furnace door device, an electric heating element and an auxiliary device. The function of the furnace frame is to bear the load of the furnace lining and the workpiece, and usually there are section steel welded into a frame, and the steel plate is covered. The function of the furnace shell of the vacuum atmosphere furnace is to protect the furnace lining, strengthen the structure of the electric furnace and maintain the airtightness of the electric furnace. The steel plate is usually welded on the steel frame. The reasonable design of the furnace frame and the furnace shell has sufficient strength. Let’s take a look at the installation method:

1、真空氣氛爐無需特殊安裝，只需放置在平坦的地面或工作台上即可。 控制器應避免震動，位置不宜離電爐太近，以防過熱，電子元件不能正常工作。

2. Before installing the electric furnace, check whether it is damaged or incomplete due to transportation or other reasons. If it is complete, remove the dirt from the parts first, repair the defects found, and then install it.

3、將熱電偶從偶合孔中插入，並用石棉繩將偶合孔與熱電偶之間的空隙填滿，防止熱量散失。

4、檢查真空氣氛爐電熱元件有無斷裂、龜裂、嚴重彎曲、掉磚等現象。

5、電源線、電爐線、補償線請參照控制器說明書接線圖。

6. After the wire is connected, please follow the procedure below to bake the new vacuum atmosphere furnace before using it for the first time.