Na’urorin kariya guda shida don sanyi mai sanyi na’urar sanyaya daki

1. Saurin zafi

Don hana rashin katsewar na’urar sanyaya iska a cikin sa’o’i, wanda ke haifar da babban lodin aiki na kwampreso, na’urar lantarki mai lahani, wuce gona da iri ta hanyar riƙe shaft, ko ƙonewar injin da zafin jiki na motar ya haifar, compressor shine shigar a cikin kwampreso. The thermostat, wanda aka shigar a kan tsaka tsaki lamba na uku-lokaci motor, kare mota ta yanke sassa uku a lokaci guda a lokacin da wani rashin daidaituwa ya faru.

Na biyu, electromagnetic canji

Maɓalli na lantarki shine don sarrafa aikin damfara mai sanyaya na iska mai sanyaya chiller mai sanyaya iska, kuma za’a dakatar da maɓallin don tsayawa, kuma dole ne a kiyaye shigarwa a tsaye. Idan shigarwa ba daidai ba ne, matsa lamba na node spring zai canza kuma za a haifar da hayaniya. , Sakamakon rashin aiki na lokaci, don samfuran kwampreso sanye take da mai kashe wutar lantarki kai tsaye, babu buƙatar loda mai kariya.

Uku, mai kariyar juzu’i

Gungurawa compressors da piston compressors suna da tsari daban-daban kuma ba za a iya juya su ba. Domin samar da wutar lantarki na kashi uku na chiller mai sanyaya iska zai haifar da kwampreso don jujjuya lokaci, wajibi ne a shigar da mai kariyar juzu’i don hana na’ura mai sanyaya sanyi daga juyawa. . Bayan shigar da kariyar lokaci na baya, compressor na iya gudana a cikin lokaci na al’ada, amma ba a cikin juzu’i ba. Lokacin da juzu’in ya faru, za a iya canza wayoyi biyu na wutar lantarki zuwa lokaci na yau da kullun muddin ana juyar da wayoyi biyu.

Hudu, kariyar yanayin zafi

Don kare kwampreso a ƙarƙashin babban aiki mai nauyi ko rashin isasshen refrigerant, tsarin sanyaya mai sanyaya iska yana buƙatar sanye take da mai kariyar zafin jiki, kuma an saita yawan zafin jiki zuwa 130 ° C don dakatar da kwampreso, Wannan ƙimar zafin jiki tana nufin da kwampreso shaye bututu daga kanti.

Biyar, ƙaramin ƙarfin wutar lantarki

Domin kare kwampreso na chiller mai sanyaya iska daga gudu lokacin da injin bai isa ba, ana buƙatar ƙaramin matsa lamba. Lokacin da saitin ya kasance sama da 0.03mpa, compressor zai daina aiki. Da zarar kwampreso yana gudana a ƙarƙashin yanayin rashin isasshen firiji, zazzabin ɓangaren kwampreso da ɓangaren motar zai tashi nan take. A wannan lokacin, ana iya amfani da maɓalli mai ƙarancin ƙarfi don lalacewar kwampreso da motar da ba za a iya kiyaye ta ta na’urar zafin jiki na ciki da mai kariyar zafin jiki ba. Kona shi don kariya.

Shida, babban ƙarfin wutar lantarki

Ana iya dakatar da kwampreso lokacin da matsa lamba mai ƙarfi ya tashi ba daidai ba, kuma an saita matsa lamba a ƙasa.