Canji mai sauri don kashe inductor

Alakar dake tsakanin inductor and the quenching transformer requires strong electrical connection, low resistance, and reliability. The early design of the inductor and the transformer contact plate are connected with bolts and nut washers: the intermediate frequency sensor has two rows of M12 bolts, a total of 10 bolts; the high frequency sensor also has M8 or M10 bolts, a total of 4 bolts. It is time-consuming and laborious to load and unload the sensor once, and the cooling water inlet and outlet pipes need to be connected to the sensor, which increases the auxiliary time.

Canji mai sauri don firikwensin

Hoton yana nuna chuck mai saurin canzawa don firikwensin firikwensin, wanda ya ƙunshi jikin farantin lamba, latsa lamba, toshe latsawa, zoben rufewa da bawul ɗin shigar ruwa. A tsakiyar gaba akwai tashar shigar da firikwensin, kuma zoben rufewa guda biyu su ne mashigan ruwa da fitar firikwensin. Lokacin da firikwensin tare da daidaitaccen tsarin haɗin haɗin ya shiga tashar shigarwa, karkatar da hannun 3, toshewar bakelite yana danna shingen haɗin kai zuwa ƙasan tashar shigarwar, kuma haɗin ruwa da wutar lantarki ya ƙare a lokaci ɗaya. Lokacin maye gurbin firikwensin, ana iya rufe bawul ɗin shigar ruwa 5. Tare da wannan tsarin, yana ɗaukar kimanin daƙiƙa 10 don maye gurbin na’urar firikwensin, wanda ke inganta ingantaccen aiki sosai kuma yana adana aiki. An yi amfani da wannan chuck sosai a samarwa kuma ya fi dacewa da ƙarfin mitar da ke ƙasa da 60kW.

Hoto Sensor Canjin Saurin Canji da firikwensin

a) Canji mai saurin canzawa b) Canjin sauri tare da firikwensin

1 zoben rufewa 2-matsi toshe 3-hannu 4 farantin lamba jiki 5-bawul mai shigar ruwa