Karakteristika og proces ved crankshaft quenching equipment

The main features of crankshaft quenching equipment:

1. Vedtagelse af digitalt kontrolsystem, avanceret ydeevne, nem at bruge, nøjagtig positionering, med quenching-funktioner såsom forbindelse, samtidig, segmenteret forbindelse og segmenteret samtidig.

2. Høj grad af automatisering, programmering i henhold til arbejdsemnets procesflow, fuldender automatisk opvarmning, rotation, vandsprøjtning og hurtig retur.

3. Diversificerede bratkølingsmetoder, kontinuerlig scanning bratkøling, således at hele skaftet har et ensartet bratkølingslag og ensartet hårdhed.

4. Den kan bruges til induktionshærdning af aksler, skiver, stifter, tandhjul og andre dele, med høj præcision og lang levetid.

5. The frequency of the equipment can be based on the requirements of the workpiece processed by the user, generally 15-35KHz, the suitable hardened layer is 2-6mm, the hardened layer is moderate, the hardness meets the requirements, the amount of deformation is small, and the speed is 1/3 faster than the thyristor intermediate frequency .

6. Induktoren er en induktor af åben-lukket type, det er ikke nødvendigt at fjerne emnet under bratkøling, og induktoren kan direkte spænde den ydre cirkel af emnet.

The process of crankshaft quenching equipment: After the workpiece is heated, it will rotate at a constant speed. At the same time, it will be sprayed for quenching. The sensor is sprayed with water, so that after the workpiece is heated to the required temperature, the water spray solenoid valve can be automatically opened to spray water. The depth of the hardened layer and the hardness of the hardened layer, the power is adjustable, the heating speed is fast, the hardened layer is uniform and moderate, and it is energy-saving and energy-saving; the temperature is easy to control, the heating range is wide, and the applicability is strong. It is only for metal induction heating, environmentally friendly and pollution-free!