Menene gwajin kaya na bututun ƙarfe shigar da wutar makera?

After the no-load test run is completed, the load test run should be carried out immediately under the guidance of the purchaser’s experts. The purpose of the load test is to verify that the processing capacity of the contracted steel tube induction heating furnace meets the requirements of Party A.

A karkashin aikin al’ada na bututun ƙarfe shigar da wutar makera, ana gudanar da gwaje -gwaje masu zuwa:

(1) Ƙimar gazawar bututun ƙarfe shigar da tanderu mai zafi: Zaɓi nau’ikan bututu na ƙarfe 3 don ci gaba da aiki na awanni 24, kuma za a ɗauka cewa bututun ƙarfe shigar da murhun dumama yana da inganci idan babu gazawa.

(2) Buƙatun dumama za su cika buƙatun (saurin da zazzabi) na Ƙarin bututun ƙarfe na Party A 1.1.

(3) Daidaitaccen zafin jiki: Kuskuren zafin jiki tsakanin tsayin shugabanci da ɓangaren sashin bututun ƙarfe mai dumama shine degrees 10 digiri. Kuskuren zafin jiki tsakanin shugabanci mai tsayi da shugabanci na bututu na ƙarfe da Jam’iyyar A ke bayarwa kuma ± 10 ne.

(4) Dole ne tsarin sarrafawa da tsarin aunawa ya kasance tabbatacce kuma abin dogaro.

(5) Gwajin aikin farawa: An fara sau goma kuma an yi nasara sau goma. Idan ɗayansu bai ci nasara ba, an yarda da wasu gwaje -gwaje ashirin. Idan ɗayansu bai yi nasara ba, to ana ɗaukar wannan abun bai cancanta ba.

(6) Cikakken gwajin wutar lantarki: Cikakken ikon bututun ƙarfe shigar da wutar makera ba ta gaza ƙarfin da aka ƙaddara ba.

(7) Gwajin mitar aiki: Mitar aiki bata wuce ± 10% na ƙimar da aka ƙidaya ba.

(8) Gwajin aikin kwamfuta: gami da gwajin software, gwajin kayan aiki da aikin nuni da zafin jiki don biyan buƙatun ƙira.

(9) Gwajin Kariya: Ƙara siginar analog na kariya zuwa tashoshin shigarwa na kowane da’irar kariya ɗaya bayan ɗaya, kuma lura cewa akwai alamun kariya a kan madaidaicin ƙarfin wutar lantarki da kwamfutar masana’antu.

(10) Jimlar gwajin dumama dumama: jimlar ƙarfin dumama bai wuce 0.55 ba.

(11) Gwajin lokacin sauyawa na firikwensin: Lokacin sauyawa na firikwensin guda ɗaya bai wuce mintuna 10 ba.

(12) Idan gwajin siginar samar da wutar lantarki: sigogi na wutar lantarki na IF yakamata su cika ƙimar ƙira.