Kev daws teeb meem hauv Circuit Court teeb meem ntawm mutton slicer

mutton slicer is the main equipment for cutting mutton. It is an indispensable equipment for hot pot restaurants. Today’s machines are basically automated, and this is related to the internal circuit. What should I do if there is a problem with the internal circuit?

1. Txiav tawm cov hlau xoob xoob ntawm cov hlau tawg ua ntej, thiab tawm ob lub hlau hlau xaus 10 cm ntev dua qhov kev ncua deb ntawm cov log tsheb.

2. Siv cov ntawv xuab zeb ntxhib los xuab zeb txoj kab uas hla ntawm ob qhov kawg ntawm cov hlau xaim mus rau 1/2-2/3 ntawm cov hlau hlau ntawm tus qub mutton slicer, thiab qhov ntev yuav tsum siab tshaj 5 cm. Siv cov ntawv xuab zeb zoo kom du nto ntawm cov hlau hlau, thiab rov qab siv dua. Ntxuav ob steel hlau xaus nrog cawv.

3. Ob lub steel hlau xaus nrog 5 cm xuab zeb tshem tawm yog overlapped thiab welded ua ke. Siv hluav taws xob soldering hlau los txuas ib kawg ntawm cov hlau hlau homeopathically. Ob lub hlau xaim kawg yuav tsum tau sib tshooj tag nrho thiab cov hlau tsis tuaj yeem raug kaw. Thaum kuv sawv, kuv tsuas tuaj yeem rov kho dua, thiab tom qab ntawd siv cov ntawv xuab zeb zoo kom du qhov chaw vuam thiab ntxuav nws nrog cawv.

4. There must be a long section of the steel wire that is loose, and run the loose section to the rail of the mutton slicer.

5. Divide the length of a wire from the end of the guide wheel by the groove distance of the guide wheel and multiply it by the length of one turn of the steel wire guide wheel.

6. ​​Accelerate every second until the speed reaches normal, and then cut.

If there is a problem with the internal circuit of the mutton slicer, first cut off the power supply and check whether the wire is in good contact. You can solve it according to the above methods and let the slicer run smoothly.