ການ​ແກ້​ໄຂ​ບັນ​ຫາ​ວົງ​ຈອນ​ພາຍ​ໃນ​ຂອງ slicer mutton​

mutton slicer is the main equipment for cutting mutton. It is an indispensable equipment for hot pot restaurants. Today’s machines are basically automated, and this is related to the internal circuit. What should I do if there is a problem with the internal circuit?

1. ຕັດສາຍເຫຼັກວ່າງຢູ່ສາຍທີ່ຫັກອອກກ່ອນ, ແລະປະໄວ້ສອງສາຍເຫຼັກຍາວກວ່າໄລຍະຫ່າງລະຫວ່າງລໍ້ຄູ່ມື 10 ຊມ.

2. ໃຊ້ກະດາດກະດາດຫຍາບຂັດເສັ້ນຜ່າກາງຂອງສອງສົ້ນຂອງສາຍເຫຼັກເປັນ 1/2-2/3 ຂອງສາຍເຫຼັກຂອງເຄື່ອງຕັດ mutton ຕົ້ນສະບັບ, ແລະຄວາມຍາວຄວນຈະຫຼາຍກ່ວາ 5 ຊຕມ. ໃຊ້ກະດາດຊາຍລະອຽດເພື່ອເຮັດໃຫ້ພື້ນຜິວຂອງສາຍເຫຼັກລຽບ, ແລ້ວໃຊ້ມັນອີກເທື່ອຫນຶ່ງ. ລ້າງສາຍເຫຼັກສອງເສັ້ນຈົບດ້ວຍເຫຼົ້າ.

3. The two steel wire ends with 5 cm sand removed are overlapped and welded together. Use an electric soldering iron to weld one end of the steel wire homeopathically. The two steel wire ends must be completely overlapped and the steel wire cannot be warped. When I get up, I can only re-solder, and then use fine sandpaper to smooth the welding place and wash it with alcohol.

4. There must be a long section of the steel wire that is loose, and run the loose section to the rail of the mutton slicer.

5. Divide the length of a wire from the end of the guide wheel by the groove distance of the guide wheel and multiply it by the length of one turn of the steel wire guide wheel.

6. ​​Accelerate every second until the speed reaches normal, and then cut.

If there is a problem with the internal circuit of the mutton slicer, first cut off the power supply and check whether the wire is in good contact. You can solve it according to the above methods and let the slicer run smoothly.