Solusi kanggo masalah sirkuit internal saka slicer daging kambing

mutton slicer is the main equipment for cutting mutton. It is an indispensable equipment for hot pot restaurants. Today’s machines are basically automated, and this is related to the internal circuit. What should I do if there is a problem with the internal circuit?

1. Cut mati kabel baja ngeculke ing kabel bejat pisanan, lan ninggalake loro kabel baja ends 10 cm maneh saka jarak antarane gembong guide.

2. Gunakake sandpaper coarse kanggo wedhi diameteripun saka loro ends saka kabel baja kanggo 1 / 2-2 / 3 saka kabel baja saka slicer mutton asli, lan dawa kudu luwih saka 5 cm. Gunakake sandpaper sing apik kanggo ngresiki permukaan kawat baja, banjur gunakake maneh. Wisuh loro kawat baja ends karo alkohol.

3. Kawat baja loro ends karo 5 cm wedhi dibusak tumpang tindih lan gandheng bebarengan. Gunakake wesi solder listrik kanggo ngelas siji ujung kabel baja kanthi homeopati. Kawat baja loro ends kudu rampung tumpang tindih lan kabel baja ora bisa warped. Nalika aku tangi, Aku mung bisa re-solder, lan banjur nggunakake sandpaper nggoleki Gamelan panggonan welding lan wisuh karo alkohol.

4. There must be a long section of the steel wire that is loose, and run the loose section to the rail of the mutton slicer.

5. Divide the length of a wire from the end of the guide wheel by the groove distance of the guide wheel and multiply it by the length of one turn of the steel wire guide wheel.

6. ​​Accelerate every second until the speed reaches normal, and then cut.

If there is a problem with the internal circuit of the mutton slicer, first cut off the power supply and check whether the wire is in good contact. You can solve it according to the above methods and let the slicer run smoothly.