Camshaft induction heating quenching quality

After the 8 cams are cooled by induction heating and immersion, the depth and quenching hardness of the hardened layer are shown in Table 3 . It can be seen from Table 3 that both indicators meet the technical requirements of the product map. It can be seen from the cross-sectional view of the quenched part of the cam that the hardened layer is uniform and the position is correct.
Table 3 Camshaft quenching hardness and depth of hardened layer

Cam number	Quenching hardness HRC	Hardening layer depth /mm
Cam number	Quenching hardness HRC	muromo	Base denderedzwa
1	51 53.5 55	7.8	5.7
2	52 54 54	7.2	6.0
3	55 55.5 53	10.0	6.5
4	53 53 56	7.5	6.4
5	50 51 52.5	9.6	7.3
6	56 55 56	10.3	7.5
7	54 52 54	10.8	7.7
8	52 50 52	9.5	7.0

After the camshaft is quenched, the increased value of radial runout is tested to be 0.15mm , which can meet the requirements of the next process without straightening. The temperature of the quenching medium is in the range of 10°C-40°C , and the quenched cam has no quenching cracks through fluorescent inspection.

https://songdaokeji.cn/14033.html

https://songdaokeji.cn/14035.html

https://songdaokeji.cn/14037.html