Sebaka se futhumatsang mocheso oa motlakase o mahareng

1, lintho tse bonahalang bareng sebōpi se futhumatsang se maqhubu a mahareng Sebelisa:

Setsi sena sa bar frequency frequency induction heating se sebelisoa haholo bakeng sa ho futhumatsa ha mekoallo ka bophara ba 75 mm le bolelele ba 100-150 mm. Mocheso oa ho qetela oa ho futhumatsa ke 1100 ° C. Bar lintho tse mahareng tse futhumatsang mocheso oa motlakase ho etsa bonnete ba hore ho futhumala ha sehlahisoa se sebetsang ho fihla tempeleng ka metsotsoana e 10. Phapang ea mocheso oa mantlha: e ka tlase ho 50 ° C

2, bareng lintho tse mahareng maqhubu a motlakase oa ho futhumatsa o khetha mokhoa oa ho khetha

3, lits’oants’o tsa mantlha tsa mahlale le litšobotsi tsa sebōpi se futhumatsang khafetsa

1. Phepelo ea motlakase ea maqhubu a Thyristor e mahareng:

Matla a 1.1 ke 800KW, Maqhubu ke 1000Hz.

Sekhahla sa katleho ea ho qala sa 1.2 se ka fihla 100%

1.3 matla a matla a tokiso a kholo ho feta kapa a lekana le 0.92

1.4 e nang le sebopeho sa mocheso oa mocheso oa mocheso o koetsoeng

1.5 ka phetoho ea kahare le kantle le phetoho e iketsang ea letsoho

1.6 multi-station structure can easily and quickly replace the furnace body according to different heated workpieces

1.7 IF voltage 750V

1.8 DC voltage 500V

1.9 tsohle-dijethale, ha ho taolo lesokoana sekgoqetsane, etsa tsamaiso ea tsitsitseng le e ka tšeptjoang

1.10 with over-current, over-voltage, under-pressure, phase loss, water pressure, water temperature and other complete protection, to ensure that any failure does not damage the bar medium frequency induction furnace components

1.11 mohato o kenang oa mekhahlelo e meraro ha o arole likarolo tsa tatellano, o ka hokahanngoa ka mokhoa o ikhethileng

1.12 Mofuta o bonolo oa ho sebelisa “lithoto” mofuta oa bareng oa maqhubu a maqhubu a mocheso o futhumatsang, le ka mohla o sa utloisisane

2. Induction heater :

2.1 Induction heater is a quick change joint structure.

2.2 The sensor is made of high quality knotted knots.

2.3 Terene e tataisang ka hare ea sensor e tšoaroa ka mokhoa o khethehileng ebile e bentšitsoe.

2.4 Coil ea inductor, bareng ea bese le likhoele tse hokahanyang li na le sebaka se seholo se arohaneng ho fokotsa mocheso.

2.5 Khokahano ea kahare ea kela ea inductor ea ts’epahala, inductor e etsoa ka tieo ho latela litlhoko tsa ts’ebetso, le teko ea khatello e phahameng ea khatello pele ho kopano.

2.6 Sesebelisoa sa mocheso se kentsoe holim’a kela ea sensor, ‘me e tla emisa ka bo eona ha mocheso oa metsi o feta 65 ° C. Ha e sa sebetse, condensate e ho li-coil tsa inductor e ka tsoa ka moea o petelitsoeng.

2. Khokahano ea tsela ea metsi ea 7 ke sehokedi se potlakileng. Bakeng sa khokahano e tšepahalang le phetoho e potlakileng ea khokahano, ho sebelisoa li-bolts tse kholo tse sa ts’epeng tsa celik.

3 , the console

Panopo ea ponts’o e na le ponts’o ea maqhubu a maqhubu a mahareng, matla, DC hajoale, le switch switch ea motlakase ea maqhubu a mahareng, kotola ea letsoho e iketsang, konopo ea ho lokisa motlakase le konopo ea ho emisa maemo a tšohanyetso, le lits’ebetso tse ling tse amanang le ts’ebetso le li-switch switch switch.

4, tlhaloso ea ts’ebetso ea mosebetsi:

Motsamaisi o lokolla mosebetsi o sa futhumaleng sethaleng sa polokelo. Tlas’a tšebetso ea silindara, mochini o sutumetsang o sutumetsa sengoathoana se kentsoeng ka seboping se sutumelletsang sebōpi bakeng sa ho futhumatsa ho latela tempo e behiloeng. Moralo oa karolo ea mochini o hloka ho tiea, ho tenyetseha, ho ba le kahlolo e molemo, le ts’ebetso e bonolo le tlhokomelo.