Tšebeliso le tlhokomelo ea sebōpi sa 0.25T induction melting

1. 1. Ho sekama ha ‘mele oa sebōpi ho etsoa ka ho sebetsa k’haboteng kapa ho tsamaisa lebokose la konopo. Tobetsa le ho tšoara konopo ea “L”, ‘mele oa sebōpi o tla potoloha pele,’ me molomo oa sebōpi o tla theoleloa ho lumella tšepe e qhibilihisitsoeng ho tsoa molomong oa sebōpi. Ha konopo e lokolloa, sebōpi se tla lula se le boemong ba pele ba ho sekama, kahoo ‘mele oa sebōpi o ka potoloha ho lula sebakeng leha e le sefe. Tobetsa ‘me u tšoare konopo ea “down”‘ me sebōpi se tla potoloha morao ho fihlela konopo e lokolloa sebakeng se otlolohileng.
2. Ntle le moo, ho na le konopo ea “Emergency Stop”, haeba ho ka hatelloa konopo ea “Lift” kapa “Lower” ebe e lokolloa, konopo e ke ke ea khutlisetsoa morao, hang-hang tobetsa konopo ea “Emergency Stop” ho khaola. matla. ‘Mele oa sebōpi o khaotsa ho potoloha;
3. 2. Ha ho qhibiliha, ho tlameha ho ba le metsi a pholileng a lekaneng ka har’a sensor. Kamehla hlahloba hore na khatello ea metsi le mocheso oa metsi oa liphaephe tse kenang le tsa ho tsoa li tloaelehile nakong ea ho qhibiliha;
4. 3. Pipe ea metsi a pholileng e lokela ho hloekisoa kamehla ka moea o hatelitsoeng, ‘me phala ea moea e hatelitsoeng e ka kopanngoa le motsoako holim’a phaephe ea ho kenya metsi. Koala mohloli oa metsi pele u qhaqha motsoako oa phala;
5. 4. Ha u emisa sebōpi nakong ea mariha, hoa lokela ho hlokomeloa hore ha hoa lokela ho ba le metsi a setseng ka har’a coil ea induction, ‘me e tlameha ho phahamisoa ka moea o hatelitsoeng ho thibela ho phatloha ha serame;
6. 5. Ha u kenya busbar, tiisa li-bolts tse kopanyang ‘me u hlahlobe hore na li-bolts li lokolohile ka mor’a ho bula sebōpi;
7. 6. Ka mor’a hore sebōpi se buloe, ho hlokahala hore u hlahlobe kamehla hore na manonyeletso le li-bolts tsa fastening li hlephileng, ‘me u ele hloko haholoanyane li-bolt tse kopanyang lipoleiti tsa conductive;
8. 7. Ha lerako le kenngoa, le lokela ho lokisoa. Tokiso e arotsoe ka mekhahlelo e ‘meli: tokiso e felletseng le tokiso e sa fellang:
9. 7.1. Tokiso e felletseng
10. E sebelisoa ha lerako le ts’oaroa ka ho lekana ho botenya bo ka bang 70 mm.
11. Mehato ea ho patch ke e latelang:
12. 7.1.1. Hlakola li-slag tsohle tse khomaretsoeng leboteng la crucible ho fihlela lera le sintered le tšoeu le pepesitsoe;
13. 7.1.2. Beha lefu le tšoanang le ha sebōpi se hahoa, beha setsi ‘me u se lokise moeling o ka holimo;
14. 7.1.3. Lokisetsa lehlabathe la quartz ho latela mokhoa le mokhoa oa ts’ebetso o fanoeng linthong tsa 5.3, 5.4, le 5.5;
15. 7.1.4. Tšela lehlabathe le lokiselitsoeng la quartz pakeng tsa crucible le pheleu ‘me u sebelise φ6 kapa φ8 tšepe e chitja;
16. 7.1.5. Ka mor’a compaction, eketsa tefiso ho crucible le mocheso ho 1000 ° C, ka ho khetheha bakeng sa lihora tse 3 pele u tsoela pele ho futhumatsa ho qhibilihisa tefiso.
17. 7.2 tokiso e sa fellang
18. E sebelisoa ha botenya ba lebota bo sa fellang bo le ka tlase ho 70mm kapa ho na le khoholeho ea mobu ka holim’a khoele ea induction.
19. Mehato ea ho patch ke e latelang:
20. 7.2.1. hlakola slag le li-deposit sebakeng se senyehileng;
21. 7.2.2. Lokisa tefiso ka poleiti ea tšepe, tlatsa lehlabathe le lokiselitsoeng la quartz, ‘me u kopane. Hlokomela hore ha ua lokela ho lumella poleiti ea tšepe hore e tsamaee ka nako ea sebele;
22. Haeba karolo e tsitsitseng e le ka hare ho coil induction, mokhoa o feletseng oa ho lokisa o ntse o hlokahala;
23. 8. Kamehla eketsa oli ea lubricating karolong e ‘ngoe le e’ ngoe ea ho tlotsa ea sebōpi sa induction;