羊肉切片機內部電路問題的解決方法

mutton slicer is the main equipment for cutting mutton. It is an indispensable equipment for hot pot restaurants. Today’s machines are basically automated, and this is related to the internal circuit. What should I do if there is a problem with the internal circuit?

1、先將斷絲處鬆散的鋼絲剪掉，使兩根鋼絲末端比導輪之間的距離長10厘米。

2、用粗砂紙將鋼絲兩端的直徑打磨至原羊肉切片機鋼絲的1/2-2/3，長度應大於5厘米。 用細砂紙將鋼絲表面打磨光滑，然後再使用。 用酒精清洗兩根鋼絲末端。

3.將去除5厘米沙子的兩條鋼絲末端重疊焊接在一起。 使用電烙鐵順勢焊接鋼絲的一端。 兩條鋼絲端部必須完全重疊，鋼絲不能翹曲。 起床後只能重新焊接，然後用細砂紙將焊接處磨平，用酒精清洗。

4. There must be a long section of the steel wire that is loose, and run the loose section to the rail of the mutton slicer.

5. Divide the length of a wire from the end of the guide wheel by the groove distance of the guide wheel and multiply it by the length of one turn of the steel wire guide wheel.

6. ​​Accelerate every second until the speed reaches normal, and then cut.

If there is a problem with the internal circuit of the mutton slicer, first cut off the power supply and check whether the wire is in good contact. You can solve it according to the above methods and let the slicer run smoothly.