Indlela yokuvelisa i-inductor yomshini wokufudumeza induction

Ikhoyili ye-induction sisixhobo sokufudumeza esiyimfuneko kumatshini wokufudumeza wokungenisa. Emva kokuba siqonde umgaqo wokusebenza wekhoyili ye-induction, makhe sithethe ngendlela yokuvelisa ikhoyili ye-induction kwizixhobo ezixhasayo ezixhasayo:

1. Qwalasela ubungakanani kunye nokumila kwesixhobo sokufudumeza.

2. Qinisekisa inani lokujika kwekhoyili ye-induction ngokweqondo lokushisa lokushisa. Ukuba idlula i-700 ° C, i-double-turn okanye i-multi-turn structure kufuneka isetyenziswe.

3. Lungisa i-gap ye-coil induction: i-gap phakathi kwe-workpiece encinci kunye ne-coil induction kufuneka ilawulwe ngaphakathi kwe-1-3mm, ukwenzela ukuba intloko ye-flat wedge ibekwe phantsi nje; Umsantsa phakathi kwesixhobo sokusebenzela esikhulu kunye nekhoyili yokungeniswa yahluke ngandlel’ ithile kuleyo yesixhobo esincinci sokusebenza. Xa ukulungiswa kwamandla kunye nokujikeleza kuhlengahlengiswe ukuya kwinqanaba eliphezulu, okwangoku kuye kwafikelela kwinqanaba eliphezulu kodwa isantya sokufudumeza sicotha kakhulu, ngeli xesha, umsantsa phakathi kwe-workpiece kunye ne-coil induction kufuneka incitshiswe okanye inani le-coil induction induction. ukujika kufuneka kwandiswe.

4. I-coil induction kufuneka ibe ityhubhu yobhedu enobubanzi obungaphezulu kwe-8mm kunye nobukhulu bodonga lwe-1mm. Ukuba ububanzi betyhubhu yobhedu ejikelezileyo bukhulu kune-8mm, kungcono ukuyiqhubela kwityhubhu yethusi yesikwere kuqala, kwaye emva koko ugobe ikhoyili ye-induction;

5. I-tube yobhedu ifakwe kwi-annealed ukuququzelela ukugoba kunye nokwenza, kwaye emva koko uyibeke kwi-workpiece elungiselelwe okanye isikhunta, kwaye ngokuthe ngcembe ucofe imilo ye-coil induction eyenzelwe ngokweemfuno. Kungcono ukusebenzisa isando somthi xa ucofa. Oku akulula ukususa ubhedu. Umbhobho kufuneka ubethelwe phantsi, kwaye indawo yokuguqula kufuneka ibethelwe ngokukhawuleza, ingabi nzima kakhulu;

6. Emva kokugoba, ipompo yomoya isetyenziselwa ukudlula amanzi ukujonga ukuba i-coil induction ivaliwe; i-coil yokufaka i-coil ene-multi-turn structure yokuthintela isiphaluka esifutshane phakathi kokujika, izixhobo zokugquma ubushushu obuphezulu (ityhubhu ye-insulation, i-ribbon yeglasi, i-Cement enganyangekiyo emlilweni), inxalenye yoqhagamshelwano yombane edityaniswe nomatshini iya kupholisa umgangatho we-oxide ococekileyo.

Ukuqapha

I-coil induction ayifanele ibe yifutshane-ejikelezayo, kwaye i-workpiece yensimbi akufanele idibane nombhobho wobhedu we-coil induction. Ngaphandle koko, kuya kubangela iintlantsi, umatshini awuyi kusebenza ngokufanelekileyo ngokuzikhusela kwimeko elula, kwaye umatshini kunye ne-coil induction iya konakala kwimeko enzima. Zama ukuba ungazenzi ngokwakho ukuze ungabangeli umonakalo ongeyomfuneko.