Takamaiman tsari don kashewa da kula da zafin diski da ruwan wukake tare da kayan aiki mai ƙarfi na ƙarfafawa

Yanayin aiki na faifan saw ɗin yana da tsauri. Don biyan bukatun aikin, masana’antun da yawa suna amfani da su high-frequency induction hardening kayan aiki don kashe maganin zafi, kuma sakamako yana da kyau. A yau, bari mu kalli tsarin murƙushe shigar azzakari.

Wannan kayan aikin ribar daidai yake da ƙarfe T10 (bambancin shine babban abun cikin tungsten), tsayin kowane diski shine 400mm, faɗin faɗin saw shine 6-38mm, kaurin ruwan saw shine 0.4-1.3mm, kuma adadin hakora a kowace inch (1 inch shine 25.4mm) tsayinsa shine 3-32. Hanyar aiwatarwa ita ce: gaba ɗaya kashewa, zafin jiki (taurin 380-430HV), buɗe haƙora, ƙarar haƙori (ba mai zafi a tsintsiyar haƙora), da ƙarancin zafin jiki. Cikakken kayan aikin shima yana da wutar lantarki mai gyara. Ana amfani da kayan aiki mai ƙarfi na ƙarfafawa don kashe zafin zafi. Hanyar kashewa shine binciken kashewa, kuma saurin binciken shine 5-15m/min. Abin da ake buƙata na taurin ƙarfafawa shine: ɓangaren haƙoran kawai yana buƙatar ƙarfafa, kuma ramin haƙori ba zai iya zama da wahala ba.

Yawancin masana’antun suna amfani da kayan aikin ƙarfafawa na ƙarfafawa don kashe zafin zafi, kuma ƙwanƙwasawa da saka juriya na ruwan wukar da aka samar ana inganta su sosai, wanda ya cika buƙatun aikin. Abin da ya fi kyau shi ne cewa wannan tsarin ya dace da samar da taro kuma yana iya haɓaka ingantaccen aikin ma’aikata.