- 01
- Apr
Electroreactor insulation cylinder
Electroreactor insulation cylinder
The reactor insulator, also known as the resistance shell and the reactor insulation bracket, adopts the epoxy resin insulation cylinder shell, with sufficient electrical and mechanical strength, necessary heat dissipation capacity and the margin of oil heat expansion and cold shrinkage.The reactor housing comes with the base and the upper end of another section.The shell is painted with white or orange insulated paint.The reactor insulation shell can be free and convenient to stack and lift.
Two, product performance
Tablo paramèt pèfòmans nan klas H epoksidik vèr izolasyon silenn
| Non | Non endikatè | Kondisyon pou | Inite | Valè endèks |
| 1 | Dansite | G/cm 3 | 1.9-2.0 | |
| 2 | Entansite nan koube | Pa gen mwens pase | MPA | 320 |
| 3 | Fòs rezistans presyon | Pa gen mwens pase | MPA | 200 |
| 4 | Anti-taye fòs | Pa gen mwens pase | MPA | 32 |
| 5 | Faktè pèt mwayen (50Hz) | Pa gen plis pase | 0.02 | |
| 6 | Konstan dyelèktrik la | 3 ~ 6 | ||
| 7 | Lè volim rezistivite nòmal | Pa gen mwens pase | Qm | 10X1011 |
| Apre imèsyon | 10X109 | |||
| 8 | Lè kouch paralèl la deplase nan direksyon rezistans izolasyon nòmal la | Pa gen mwens pase | Q | 10X1011 |
| Apre imèsyon | 10X109 | |||
| 9 | Rezistans vòltaj sifas
(Presyon ki reziste lmin, 30mm nan lè a) |
KV | 14 | |
| 10 | Vètikal kouch direksyon rezistans vòltaj nan 8> 3mm | KV | 20 | |
| 11 | Paralèl kouch ki reziste vòltaj (25mm espas) | Pa gen mwens pase | KV | 50 |
| 12 | rezistans izolasyon | Pa gen mwens pase | MQ | 5X104 |
| 13 | Endistriyèl frekans vòltaj rezistans distans (pa teknoloji kliyan
Kondisyon yo) |
Pa gen mwens pase | KV | 80 |
| 14 | Rezistans chalè | Pa gen mwens pase | ° C | 180 |
| 15 | Meverage tanperati deformation tèmik | Pa gen mwens pase | ° C | 250 |
Three, product characteristics
The insulation shell of the reactor is made of high quality glass fiber soaked with high-low viscosity and high-temperature epoxy resin and cross-wound along the axial direction under the control of the microcomputer. It is a high quality insulation pipe for manufacturing high voltage, composite hollow sleeve of high-high voltage SF6 high voltage electrical appliances and current transformer.The products are widely used for making the main insulation materials for high voltage products such as reactor insulation supports, outdoor high voltage fuses, lightning arresters, load split switches, dry and oil immersed transformers, railway locomotive transformers, SF6 inductors, capacitors and test devices.Product insulation temperature resistance grade H, C, etc., product implementation standard GB/T23100-2008.
IV. Product mold specifications
