Electroreactor insulation cylinder

The reactor insulator, also known as the resistance shell and the reactor insulation bracket, adopts the epoxy resin insulation cylinder shell, with sufficient electrical and mechanical strength, necessary heat dissipation capacity and the margin of oil heat expansion and cold shrinkage.The reactor housing comes with the base and the upper end of another section.The shell is painted with white or orange insulated paint.The reactor insulation shell can be free and convenient to stack and lift.

Two, product performance

Tabel parameter kinerja silinder isolasi fiberglass epoksi Kelas H

Tidak	Nama indikator	Persyaratan	Satuan	Nilai indeks
1	Kepadatan		G/cm 3	1.9-2.0
2	Intensitas lentur	Tidak kurang dari	Mpa	320
3	Kekuatan ketahanan tekanan	Tidak kurang dari	Mpa	200
4	Kekuatan anti-geser	Tidak kurang dari	Mpa	32
5	Faktor Rugi Sedang (50Hz)	Tidak lebih besar dari		0.02
6	Konstanta dielektrik			3 ~ 6
7	Ketika resistivitas volume normal	Tidak kurang dari	Qm	10X1011
7	Setelah perendaman	Tidak kurang dari	Qm	10X109
8	Ketika lapisan paralel bergerak menuju resistansi isolasi normal	Tidak kurang dari	Q	10X1011
8	Setelah perendaman	Tidak kurang dari	Q	10X109
9	Resistansi tegangan permukaan (Lmin tahan tekanan, 30mm di udara)		KV	14
10	Tegangan resistansi arah lapisan vertikal 8> 3mm		KV	20
11	Tegangan tahan lapisan paralel (spasi 25mm)	Tidak kurang dari	KV	50
12	resistansi isolasi	Tidak kurang dari	MQ	5X104
13	Jarak resistansi tegangan frekuensi industri (berdasarkan teknologi pelanggan Persyaratan)	Tidak kurang dari	KV	80
14	Tahan panas	Tidak kurang dari	° C	180
15	Suhu deformasi termal rata-rata	Tidak kurang dari	° C	250

Three, product characteristics

The insulation shell of the reactor is made of high quality glass fiber soaked with high-low viscosity and high-temperature epoxy resin and cross-wound along the axial direction under the control of the microcomputer. It is a high quality insulation pipe for manufacturing high voltage, composite hollow sleeve of high-high voltage SF6 high voltage electrical appliances and current transformer.The products are widely used for making the main insulation materials for high voltage products such as reactor insulation supports, outdoor high voltage fuses, lightning arresters, load split switches, dry and oil immersed transformers, railway locomotive transformers, SF6 inductors, capacitors and test devices.Product insulation temperature resistance grade H, C, etc., product implementation standard GB/T23100-2008.

IV. Product mold specifications