Electroreactor insulation cylinder

The reactor insulator, also known as the resistance shell and the reactor insulation bracket, adopts the epoxy resin insulation cylinder shell, with sufficient electrical and mechanical strength, necessary heat dissipation capacity and the margin of oil heat expansion and cold shrinkage.The reactor housing comes with the base and the upper end of another section.The shell is painted with white or orange insulated paint.The reactor insulation shell can be free and convenient to stack and lift.

Two, product performance

Ithebula lepharamitha yokusebenza ye-Class H epoxy fiberglass insulation cylinder

Cha	Igama lenkomba	Izidingo	Unit	Inani lenkomba
1	Ubuningi		G/cm 3	1.9-2.0
2	Amandla okugoba	Akukho ngaphansi kuka	MPA	320
3	Amandla okumelana nengcindezi	Akukho ngaphansi kuka	MPA	200
4	Amandla anti-shear	Akukho ngaphansi kuka	MPA	32
5	I-Medium Loss Factor (50Hz)	Ayikho enkulu kune-		0.02
6	I-dielectric constant			3 ~ 6
7	Lapho ukuvuselelwa kwevolumu kuyinto ejwayelekile	Akukho ngaphansi kuka	Qm	10X1011
7	Ngemva kokucwiliswa emanzini	Akukho ngaphansi kuka	Qm	10X109
8	Lapho ungqimba olufanayo lusondela ekumelaneni okujwayelekile kokuvikela	Akukho ngaphansi kuka	Q	10X1011
8	Ngemva kokucwiliswa emanzini	Akukho ngaphansi kuka	Q	10X109
9	Surface voltage ukumelana (I-lmin emelana nokucindezela,30mm emoyeni)		KV	14
10	Kuqondile ungqimba isiqondiso ukumelana voltage ka 8> 3mm		KV	20
11	Amandla kagesi ahambisana nongqimba (25mm isikhala)	Akukho ngaphansi kuka	KV	50
12	Ukumelana nokuqina	Akukho ngaphansi kuka	MQ	5X104
13	Ibanga lokumelana namandla e-Industrial frequency (ngobuchwepheshe bamakhasimende Izidingo)	Akukho ngaphansi kuka	KV	80
14	Ukumelana nokushisa	Akukho ngaphansi kuka	° C	180
15	Isilinganiso sokushisa kokushisa okushisayo	Akukho ngaphansi kuka	° C	250

Three, product characteristics

The insulation shell of the reactor is made of high quality glass fiber soaked with high-low viscosity and high-temperature epoxy resin and cross-wound along the axial direction under the control of the microcomputer. It is a high quality insulation pipe for manufacturing high voltage, composite hollow sleeve of high-high voltage SF6 high voltage electrical appliances and current transformer.The products are widely used for making the main insulation materials for high voltage products such as reactor insulation supports, outdoor high voltage fuses, lightning arresters, load split switches, dry and oil immersed transformers, railway locomotive transformers, SF6 inductors, capacitors and test devices.Product insulation temperature resistance grade H, C, etc., product implementation standard GB/T23100-2008.

IV. Product mold specifications