Electroreactor insulation cylinder

The reactor insulator, also known as the resistance shell and the reactor insulation bracket, adopts the epoxy resin insulation cylinder shell, with sufficient electrical and mechanical strength, necessary heat dissipation capacity and the margin of oil heat expansion and cold shrinkage.The reactor housing comes with the base and the upper end of another section.The shell is painted with white or orange insulated paint.The reactor insulation shell can be free and convenient to stack and lift.

Two, product performance

Talahanayan ng parameter ng pagganap ng silindro ng pagkakabukod ng Class H epoxy fiberglass

Hindi	Pangalan ng tagapagpahiwatig	Kinakailangan	Yunit	Halaga ng index
1	Kakapalan		G/cm 3	1.9-2.0
2	Tindi ng baluktot	Walang mas mababa kaysa sa	Mpa	320
3	Lakas ng paglaban sa presyon	Walang mas mababa kaysa sa	Mpa	200
4	Lakas laban sa paggugupit	Walang mas mababa kaysa sa	Mpa	32
5	Medium Loss Factor (50Hz)	Walang hihigit sa		0.02
6	Ang dielectric na pare-pareho			3 ~ 6
7	Kapag ang volume resistivity ay normal	Walang mas mababa kaysa sa	Qm	10X1011
7	Pagkatapos ng immersion	Walang mas mababa kaysa sa	Qm	10X109
8	Kapag ang parallel layer ay gumagalaw patungo sa normal na paglaban ng pagkakabukod	Walang mas mababa kaysa sa	Q	10X1011
8	Pagkatapos ng immersion	Walang mas mababa kaysa sa	Q	10X109
9	Paglaban ng boltahe sa ibabaw (Pressure-resistant lmin, 30mm sa hangin)		KV	14
10	Vertical layer direksyon pagtutol boltahe ng 8> 3mm		KV	20
11	Parallel na layer-resistant na boltahe (25mm spacing)	Walang mas mababa kaysa sa	KV	50
12	Pagkakabukod paglaban	Walang mas mababa kaysa sa	MQ	5X104
13	Distansiya ng resistensya ng boltahe ng dalas ng industriya (sa pamamagitan ng teknolohiya ng customer Mga Kinakailangan)	Walang mas mababa kaysa sa	KV	80
14	Heat resistance	Walang mas mababa kaysa sa	° C	180
15	Meverage na temperatura ng thermal deformation	Walang mas mababa kaysa sa	° C	250

Three, product characteristics

The insulation shell of the reactor is made of high quality glass fiber soaked with high-low viscosity and high-temperature epoxy resin and cross-wound along the axial direction under the control of the microcomputer. It is a high quality insulation pipe for manufacturing high voltage, composite hollow sleeve of high-high voltage SF6 high voltage electrical appliances and current transformer.The products are widely used for making the main insulation materials for high voltage products such as reactor insulation supports, outdoor high voltage fuses, lightning arresters, load split switches, dry and oil immersed transformers, railway locomotive transformers, SF6 inductors, capacitors and test devices.Product insulation temperature resistance grade H, C, etc., product implementation standard GB/T23100-2008.

IV. Product mold specifications