- 01
- Apr
Electroreactor insulation cylinder
Electroreactor insulation cylinder
The reactor insulator, also known as the resistance shell and the reactor insulation bracket, adopts the epoxy resin insulation cylinder shell, with sufficient electrical and mechanical strength, necessary heat dissipation capacity and the margin of oil heat expansion and cold shrinkage.The reactor housing comes with the base and the upper end of another section.The shell is painted with white or orange insulated paint.The reactor insulation shell can be free and convenient to stack and lift.
Two, product performance
Performance parameter tafura yeKirasi H epoxy fiberglass insulation silinda
| Aihwa | Chiratidzo zita | zvinodiwa | chikwata | Index kukosha |
| 1 | Density | G/cm 3 | 1.9-2.0 | |
| 2 | Kusimba kwekukotama | Kwete zvishoma pane | Mpa | 320 |
| 3 | Kudzvinyirira kusimba simba | Kwete zvishoma pane | Mpa | 200 |
| 4 | Anti-kuveura simba | Kwete zvishoma pane | Mpa | 32 |
| 5 | Kurasika Kwepakati Factor (50Hz) | Hapana mukuru pane | 0.02 | |
| 6 | Iyo dielectric constant | 3 ~ 6 | ||
| 7 | Kana vhoriyamu resistivity yakajairika | Kwete zvishoma pane | Qm | 10X1011 |
| Mushure mekunyudzwa | 10X109 | |||
| 8 | Kana iyo parallel layer inofamba ichienda kune yakajairwa insulation kuramba | Kwete zvishoma pane | Q | 10X1011 |
| Mushure mekunyudzwa | 10X109 | |||
| 9 | Surface voltage resistance
(Isingaite lmin,30mm mumhepo) |
KV | 14 | |
| 10 | Vertical layer direction resistance voltage ye8> 3mm | KV | 20 | |
| 11 | Parallel layer-resistant voltage (25mm spacing) | Kwete zvishoma pane | KV | 50 |
| 12 | Insulation resistance | Kwete zvishoma pane | MQ | 5X104 |
| 13 | Industrial frequency voltage resistance distance (nemutengi tekinoroji
Zvinodiwa) |
Kwete zvishoma pane | KV | 80 |
| 14 | Heat resistance | Kwete zvishoma pane | ° C | 180 |
| 15 | Meverage thermal deformation tembiricha | Kwete zvishoma pane | ° C | 250 |
Three, product characteristics
The insulation shell of the reactor is made of high quality glass fiber soaked with high-low viscosity and high-temperature epoxy resin and cross-wound along the axial direction under the control of the microcomputer. It is a high quality insulation pipe for manufacturing high voltage, composite hollow sleeve of high-high voltage SF6 high voltage electrical appliances and current transformer.The products are widely used for making the main insulation materials for high voltage products such as reactor insulation supports, outdoor high voltage fuses, lightning arresters, load split switches, dry and oil immersed transformers, railway locomotive transformers, SF6 inductors, capacitors and test devices.Product insulation temperature resistance grade H, C, etc., product implementation standard GB/T23100-2008.
IV. Product mold specifications
