How to observe the operating parameters of the şiliya pîşesaziyê to judge whether the working condition is good?

1. Germahiya evaporation û zexta evaporation

Germahiya evaporasyonê ya çîlerên pîşesaziyê dikare bi zexta evaporasyonê ya ku ji hêla pîvana zextê ya ku li dawiya valahiya qutkirina kişandina kompresorê hatî saz kirin ve were xuyang kirin. Germahiya hilkişînê û zexta hilkişînê li gorî hewcedariyên pergala sarincê têne destnîşankirin. Pir zêde nikare hewcedariyên sarbûna çîlerê bicîh bîne, û pir kêm dê kapasîteya sarbûna kompresorê kêm bike, û aboriya xebitandinê xizan e.

2. Germahiya kondensasyonê û zexta germê

The condensation temperature of the refrigerant in the industrial chiller can be based on the reading of the pressure gauge on the condenser. The determination of the condensing temperature is related to the temperature and flow rate of the coolant and the form of the condenser. In general, the condensation temperature of industrial chillers is 3-5°C higher than the cooling water outlet temperature, and 10-15°C higher than the forced cooling air inlet temperature.

3. Germahiya şûştinê ya kompresorê

The suction temperature of the compressor refers to the refrigerant temperature read from the thermometer in front of the suction shut-off valve of the compressor. In order to ensure the safe operation of the heart-compressor of the industrial chiller and prevent the occurrence of liquid hammer, the suction temperature should be higher than the evaporation temperature. In Freon refrigeration industrial chillers with regenerators, it is appropriate to maintain a suction temperature of 15°C. For ammonia refrigeration industrial chillers, the suction superheat is generally about 10°C.

4. Germahiya vekêşana kompresorê

The compressor discharge temperature of the industrial chiller can be read from the thermometer on the discharge pipe. It is related to the adiabatic index, compression ratio and suction temperature of the refrigerant. The higher the suction temperature and the higher the compression ratio, the higher the exhaust temperature, and vice versa.

5. Germahiya Subcooling berî throttling

The liquid subcooling before throttling can have a high cooling effect. The subcooling temperature can be measured from the thermometer on the liquid pipe in front of the throttle valve. Under normal circumstances, it is 1.5-3℃ higher than the outlet temperature of the subcooler cooling water.