Electroreactor insulation cylinder

The reactor insulator, also known as the resistance shell and the reactor insulation bracket, adopts the epoxy resin insulation cylinder shell, with sufficient electrical and mechanical strength, necessary heat dissipation capacity and the margin of oil heat expansion and cold shrinkage.The reactor housing comes with the base and the upper end of another section.The shell is painted with white or orange insulated paint.The reactor insulation shell can be free and convenient to stack and lift.

Two, product performance

Ytelsesparametertabell for klasse H epoxy glassfiberisoleringssylinder

Nei	Indikatornavn	Krav	Enhet	Indeksverdi
1	Tetthet		G/cm 3	1.9-2.0
2	Bøyningsintensitet	Ikke mindre enn	MPA	320
3	Trykkmotstandsstyrke	Ikke mindre enn	MPA	200
4	Anti-skjærstyrke	Ikke mindre enn	MPA	32
5	Middels tapsfaktor (50 Hz)	Ikke større enn		0.02
6	Den dielektriske konstanten			3 ~ 6
7	Når volumresistiviteten er normal	Ikke mindre enn	Qm	10X1011
7	Etter nedsenking	Ikke mindre enn	Qm	10X109
8	Når det parallelle laget beveger seg mot normal isolasjonsmotstand	Ikke mindre enn	Q	10X1011
8	Etter nedsenking	Ikke mindre enn	Q	10X109
9	Overflatespenningsmotstand (Trykkbestandig lmin, 30 mm i luften)		KV	14
10	Vertikal lagretningsresistensspenning på 8> 3 mm		KV	20
11	Parallell lagbestandig spenning (25 mm avstand)	Ikke mindre enn	KV	50
12	Isolasjonsmotstand	Ikke mindre enn	MQ	5X104
13	Industriell frekvensspenningsmotstandsavstand (etter kundeteknologi Krav)	Ikke mindre enn	KV	80
14	Varmebestandighet	Ikke mindre enn	° C	180
15	Drikk termisk deformasjonstemperatur	Ikke mindre enn	° C	250

Three, product characteristics

The insulation shell of the reactor is made of high quality glass fiber soaked with high-low viscosity and high-temperature epoxy resin and cross-wound along the axial direction under the control of the microcomputer. It is a high quality insulation pipe for manufacturing high voltage, composite hollow sleeve of high-high voltage SF6 high voltage electrical appliances and current transformer.The products are widely used for making the main insulation materials for high voltage products such as reactor insulation supports, outdoor high voltage fuses, lightning arresters, load split switches, dry and oil immersed transformers, railway locomotive transformers, SF6 inductors, capacitors and test devices.Product insulation temperature resistance grade H, C, etc., product implementation standard GB/T23100-2008.

IV. Product mold specifications