200KG matsakaiciyar mitar murhun aluminium

First, 200KG medium frequency melting aluminum furnace technical specifications and requirements:

1) , smelting material: waste aluminum material, the primary capacity is less than 10-200 kg.

2), narkewa: narkewar zafin jiki na digiri 1300, lokacin narkewa na mintuna 50-60.

3), 坩 埚: silicon carbide Crucible (m babban bango kauri 300mm babba baki m diamita 220mm) rayuwa sabis 70-80 sau.

Second, 200KG medium frequency melting aluminum furnace technology solutions and equipment selection

According to the technical requirements of the purchaser, the 200KG medium frequency melting aluminum furnace TXZ-160KW can be selected . The process is as follows:

Ana sanya kayan ƙarfe da hannu a cikin tukunyar murhu.

Bayan an narkar da ƙarfe cikin ruwa, ana sarrafa wutar makera ta wutar lantarki kuma ana zuba ruwan a cikin injin.

Third , 200KG medium frequency aluminum melting furnace TXZ-160kw quotation: ¥ 70000 yuan (excluding circulating cooling system)

1, the frequency induction heating machine (including power capacitors + box + 200 kg aluminum melting furnace electric overturned)

Na huɗu, bayanin bayanin hoto: IF ƙarfin wutan lantarki + capacitor diyya + tanderun wutan lantarki

V. Main technical parameters of T XZ- 1 6 0 kw 200KG medium frequency melting aluminum furnace:

1, matsakaicin ikon shigarwa: 160 KW
2, fitowar yanzu 40-200 A.

3, ƙarfin fitarwa: 70-550V,

4, mitar motsi: 1-20KHZ

5, input power : three-phase 380V ± 20% , 50 or 60HZ

6, shigar da wutar lantarki buƙatun iska: 3 × 40 0A

7, ƙarar wutar lantarki (CM): 47 fadi × 95 tsayi 85 tsayi

8, nauyin wuta: 135 KG

9, ƙimar ci gaba da ɗaukar nauyi: 100% awanni 24, aikin ci gaba

1 0, buƙatun iska na shigar da wutar lantarki: 3 × 150A

11. Bukatun don sanyaya ruwa na matsakaicin mita cikakken tanderu: ≥0. 3 Mpa, ≥2 5 /Min

12. Matsakaicin mitar wutar lantarki buƙatun ruwan sanyaya: ≥ 0.2Mpa ≥ 8 Min

13, hanyar ruwan wuta: daya cikin ruwa, ruwa uku

Na shida, daidaitattun kayan aiki:

Bakwai, kayan haɗin injin da aka sanya wa abokin ciniki (tsarin sanyaya wurare dabam dabam):

1. Sauyin iska mai sau uku 400A Daya

2. Haɗin wuta mai sassauƙa na USB 90 mm2 metersan mita

3. Hasumiyar sanyi 30 ton 1;

4. Pump 3.0kw/head 30-50 meters 1 set;

5, mashigar kayan aiki da bututun ruwa: babban matsin da aka inganta bututun ruwa na waje diamita 16 mm, diamita na ciki 12 mm mita da yawa

6, mashigar ruwan famfo da bututun ruwa: 1 inch (diamita na ciki 25 mm) a cikin babban matsin wutan da aka ƙarfafa bututu da yawa

Eight, 200KG intermediate frequency melting furnace using the procedure:

1, haɗin lantarki: samun dama ga layin samar da wutar lantarki da aka keɓe, bi da bi, sauyin iska sau uku. Sa’an nan kuma haɗa waya ta ƙasa. (Lura cewa ikon wutar lantarki mai hawa uku yakamata ya iya saduwa da amfani da kayan aikin, kuma yakamata a yi amfani da kaurin waya gwargwadon umarnin)

2, ruwa: (ya danganta da ci gaba da lokacin aiki da nauyin aiki) zaɓi tsarin ruwan sanyaya don cimma sanyaya ruwa.

3, ta cikin ruwa: buɗe hanyar ruwa, kuma bincika kayan aikin kowane ruwa don ganin ko akwai fitar ruwa, kwarara da matsin lamba na al’ada ne.

4, iko: da farko buɗe maɓallin wuta na sarrafawa, sannan buɗe maɓallin iska a bayan injin, sannan kunna maɓallin wuta akan kwamiti mai sarrafawa.

5. Farawa: Ya kamata a daidaita ƙarfin wutar lantarki potentiometer zuwa mafi ƙanƙanta kafin fara tanderun farko. Bayan farawa, yakamata a daidaita zafin jiki zuwa ikon da ake buƙata. Danna maɓallin farawa don fara injin. A wannan lokacin, mai nuna dumama akan allon yana haskakawa, da sautin saurin aiki na yau da kullun da walƙiyar aikin walƙiya lokaci guda.
6. Kulawa da auna zafin jiki: A lokacin aikin dumama, galibi an ƙaddara shi ta hanyoyin gani don sanin lokacin da za a daina dumama.

7. Kashewa: Kashewa, na’urar sarrafawa tana kashewa da farko, sannan ku kashe babban wutan lantarki na waje, sannan a jinkirta har zuwa kusan awa 1 bayan zafin wutar makera; sannan kashe kayan sanyaya ruwa, dumama cikin injin kuma don sauƙaƙe murfin shigarwa Ana fitar da zafi.
8. A yankin da yake da saukin daskarewa a lokacin hunturu, ya kamata a lura cewa bayan kowane amfani, yakamata a yi amfani da iska mai matsawa don busar da ruwa a ciki da kuma cikin kayan don hana ruwa tsinke kayan ciki da bututun ruwa a ciki. kayan aiki.

Nine, customer molten aluminum smelting scene pictures: