200KG maqhubu a aluminium a maqhubu a maqhubu a mahareng

First, 200KG medium frequency melting aluminum furnace technical specifications and requirements:

1) , smelting material: waste aluminum material, the primary capacity is less than 10-200 kg.

2), ho qhibiliha: mocheso o qhibilihang oa likhato tse 1300, nako e qhibilihisang ea metsotso e 50-60.

3), 坩 埚: silicon carbide tsoana le sebopi (bokantle phahameng leboteng botenya 300mm holimo molomo ka ntle bophara 220mm) bophelo tšebeletso makhetlo 70-80.

Second, 200KG medium frequency melting aluminum furnace technology solutions and equipment selection

According to the technical requirements of the purchaser, the 200KG medium frequency melting aluminum furnace TXZ-160KW can be selected . The process is as follows:

Lisebelisoa tsa tšepe li beoa ka letsoho seboping sa sebopi sa ho qhalla.

Ka mor’a hore tšepe e qhibilihe e be mokelikeli, ‘mele oa sebōpi o laoloa ka motlakase’ me mokelikeli o tšeloa ka hlobo.

Third , 200KG medium frequency aluminum melting furnace TXZ-160kw quotation: ¥ 70000 yuan (excluding circulating cooling system)

1, the frequency induction heating machine (including power capacitors + box + 200 kg aluminum melting furnace electric overturned)

Ea bone, tlhaloso ea setšoantšo ea setšoantšo: HAEBA phepelo ea motlakase + puseletso capacitor + sebopi sa ho lahla motlakase

V. Main technical parameters of T XZ- 1 6 0 kw 200KG medium frequency melting aluminum furnace:

1, matla a ho kenya a phahameng ka ho fetisisa: 160 KW
2, tlhahiso ea hona joale ea 40-200 A

3, motlakase o hlahisoang: 70-550V,

4, oscillation maqhubu: 1-20KHZ

5, input power : three-phase 380V ± 20% , 50 or 60HZ

6, kenyelletso ea phepelo ea motlakase ea moea: 3 × 40 0A

7, bophahamo ba modumo ea phepelo ea motlakase (CM): 47 bophara × 95 bophahamo ba 85 e telele

8, boima ba ‘mele: 135 KG

9, mojaro sekhahla ho tsoela pele: 100% lihora tse 24, mosebetsi o tsoelang pele

1 0, litlhoko tsa moea tsa phepelo ea motlakase: 3 × 150A

11. Litlhoko tsa metsi a pholileng a sebopi se felletseng sa maqhubu a mahareng: ≥0. 3 Mpa, 2 5 / Min

12. Litlhoko tsa metsi a pholileng a maqhubu a mahareng: ≥ 0.2Mpa ≥ 8 Min

13, tsela ea motlakase: e le ‘ngoe ka metsing, metsi a mararo

Ntlha ea botšelela, lisebelisoa tse tloaelehileng tsa lisebelisoa:

Tse supileng, lisebelisoa tsa mochini tse iketselitseng mochini (tsamaiso ea ho futhumatsa ea tsamaiso)

1. Mehato e meraro ea switch switch air 400A One

2. Khokahano ea motlakase e fetohang cable 90 mm2 limithara tse ‘maloa

3. Tora e pholileng lithane tse 30 1;

4. Pompo 3.0kw / hlooho 30-50 metres 1 set;

5, lisebelisoa tsa ho kenya metsi le lipeipi tsa metsi: khatello e phahameng ea phala ea metsi e bophara ba limilimithara tse 16, bophara ba kahare 12 mm limithara tse ‘maloa

6, pompo ea metsi le pompo ea metsi: 1 inch (bophara ba kahare 25 mm) kahare ho terata e matlafalitsoeng phala e matlafalitsoeng limithara tse ‘maloa

Eight, 200KG intermediate frequency melting furnace using the procedure:

1, khokelo ea motlakase: phihlello ea mohala o inehetseng oa phepelo ea motlakase, ka ho latellana, sesebelisoa sa mekhahlelo e meraro. Ebe u kopanya terata ea fatše. (Hlokomela hore motlakase oa mekhahlelo e meraro o tla khona ho fihlela ts’ebeliso ea lisebelisoa, ‘me botenya ba terata bo lokela ho sebelisoa ho latela litaelo)

2, metsi: (ho latela nako e tsoelang pele ea ts’ebetso le mojaro oa mosebetsi) khetha sistimi ea metsi a pholileng ho fihlela phallo ea metsi.

3, ka metsi: bula tsela, ‘me u hlahlobe lisebelisoa metsi ohle ho bona hore na ho na le phallo ea metsi, phallo le khatello li tloaelehile.

4, matla: qala pele ho bula switch switch, ebe o bula switch ea moea ka mora mochini, ebe o bulela switch ea motlakase phaneleng ea taolo.

5. Ho qala: Potentiometer ea matla a futhumatsang e lokela ho fetoloa ho bonyane pele e qala sebōpi sa pele. Kamora ho qala, mocheso o lokela ho fetoloa ho matla a hlokahalang. Tobetsa konopo ea ho qala ho qala mochini. Ka nako ena, sesupo sa ho futhumatsa se ka phanele sea bonesa, ‘me molumo o potlakileng oa ts’ebetso e tloaelehileng le khanya ea mosebetsi ka nako e le’ ngoe.
6. Tekanyo ea ho shebella le mocheso: Nakong ea ts’ebetso ea ho futhumatsa, e khethoa haholo ke mekhoa ea pono ho tseba hore na e emise ho futhumatsa neng.

7. Ho koala: Ho koala, sesebelisoa sa taolo se tima pele, ebe o tima sesebelisoa se ka ntle sa motlakase, ebe o lieha ho fihlela hora e le ‘ngoe ka mor’a mocheso oa sebōpi; joale tima lisebelisoa tse futhumatsang metsi, futhumatsa bokahare ba mochini le ho tsamaisa li-coil tsa induction Mocheso o tsoa.
8. Sebakeng seo ho leng bonolo ho hoama nakong ea mariha, ho lokela ho hlokomeloa hore kamora ts’ebeliso e ‘ngoe le e’ ngoe, moea o petelitsoeng o lokela ho sebelisoa ho fehla metsi a kenang le a kantle ho lisebelisoa ho thibela metsi hore a se ke a petsoha kahare le liphaephe tsa metsi kahare thepa.

Nine, customer molten aluminum smelting scene pictures: