Izidingo zokuhlolwa kwekhwalithi kwamagiya ngemuva kokucishwa ngu imishini yokuqeda imvamisa ephezulu

1. Ikhwalithi ephezulu

Amazinyo akufanele ashe ngokweqile, bese uhlola ukuthi kukhona imifantu emazinyweni, ukuhlolwa okungu-100% kwamaqoqo amancane, nokuhlolwa kwamaqoqo amakhulu ngokuya ngesilinganiso esishiwo.

2.Ukuqina kobuso

100% inspection for small batches, inspection for large batches according to the specified ratio, generally requiring a hardness of 45-50HRC, and a higher load capacity of 50-56HRC.

3. Inhlangano engaphezulu

Cindezela u-ZBJ36 009-88 ukuze uhlole.

4.Ukujula kwesendlalelo esiqinile

Kusetshenziswa umhloli wobulukhuni weVickers, esigabeni esiphambanweni sezinyo maphakathi nobubanzi bezinyo: ukukala kusuka ebusweni kuye ngaphakathi, ubunzima bokugcina besendlalelo esiqinile bumi kanje: umkhawulo wobulukhuni = 0.80 * ubuncane bobulukhuni bomhlaba obucaciswe ngu ukwakheka.

5. Ukusatshalaliswa kwesendlalelo esiqinile

1) Kumagiya ane-m <4mm, ukuqina kwamazinyo okugcwele kuvunyelwe, futhi ngezansi kwezinyo kunesendlalelo esithile esiqinile, ngokuvamile i-1.2mm.

2) Kumagiya ane-m = 4.5-6mm, uma usebenzisa ukufudumeza kanye nokucisha kanyekanye, ukuphakama kwamazinyo okungu-1/3 kusuka empandeni yezinyo kuvunyelwe ukuthi kungavulwa, futhi lapho izinyo elilodwa licinywa ngokuqhubekayo, 1/4 ukuphakama kwamazinyo kuvunyelwe engalalelwanga.

3) Kumagiya acinywa ngasikhathi sinye, ukujula kwesikhungo okuqiniswe ungqimba lwengxenye ye-longitudinal yegiya kungaphezulu kuka-2/3 wobukhulu besendlalelo esiphelile esiqinile.

4) When the internal gear m<6mm, the hardened layer is allowed to have a slight slope.

I-5) Yokungeniswa kwamagiya amakhulu aqinile nge-m> 8mm, ukuphakama kwamazinyo okuqinisiwe kufanele kube yi-1.7 ephindaphindwe ngemodulus, futhi lapho m <8mm, 2/3 ukuphakama kwamazinyo kufanele kuqiniswe.

Lo mbhalo wethula kafushane izinto zokuhlola, okuqukethwe nezidingo zamagiya acishiwe emishini yokuqeda imvamisa ephezulu. Ngiyethemba kuzoba wusizo emsebenzini wakho.