200KG matsakaicin mita na jan ƙarfe mai narkewa

First, 200KG medium frequency copper melting furnace technical specifications and requirements:

1) , smelting material: scrap copper material, the primary capacity is less than 10-200 kg.

2) , smelting : melting temperature of 1300 degrees, melting time of 50-60 minutes.

3) , 坩埚: silicon carbide crucible (outer high wall thickness 300mm upper mouth outer diameter 220 mm) service life 70-80 times.

Second, 200KG medium frequency copper melting furnace technology solutions and equipment selection

According to the technical requirements of the purchaser, the 200KG medium frequency copper melting furnace TXZ-160KW can be used . The process is as follows:

Ana sanya kayan ƙarfe da hannu a cikin tukunyar murhu.

Bayan an narkar da ƙarfe cikin ruwa, ana sarrafa wutar makera ta wutar lantarki kuma ana zuba ruwan a cikin injin.

Third , 200KG medium frequency copper melting furnace TXZ-160kw quotation: ¥ 70000 yuan (excluding circulating cooling system)

1, the frequency induction heating machine (including power capacitors + box + 200 kg molten copper overturned electric furnace)

Na huɗu, bayanin bayanin hoto: IF ƙarfin wutan lantarki + capacitor diyya + tanderun wutan lantarki

V. Main technical parameters of T XZ- 1 6 0 kw 200KG medium frequency copper melting furnace:

1, the maximum input power : 160 KW
2 , the output current 40-200 A

3, the output voltage: 70-550V ,

4, oscillation frequency : 1-20KHZ

5, input power : three-phase 380V ± 20% , 50 or 60HZ

6 , input power supply air requirements: 3 × 40 0A

7 , power supply volume (CM) : 47 wide × 95 high 85 long

8 , power weight: 135 KG

9, ƙimar ci gaba da ɗaukar nauyi: 100% awanni 24, aikin ci gaba

1 0, input power supply air requirements: 3 × 150A

11. Requirements for cooling water of medium frequency complete furnace: ≥0. 3 Mpa , ≥2 5 /Min

12. Medium frequency power supply cooling water requirements: ≥ 0.2Mpa ≥ 8 Min

13, power waterway: one into the water, three water

Na shida, daidaitattun kayan aiki:

Bakwai, kayan haɗin injin da aka sanya wa abokin ciniki (tsarin sanyaya wurare dabam dabam):

1. Sauyin iska mai sau uku 400A Daya

2. Haɗin wuta mai sassauƙa na USB 90 mm2 metersan mita

3. Hasumiyar sanyi 30 ton 1;

4. Pump 3.0kw/head 30-50 meters 1 set;

5, mashigar kayan aiki da bututun ruwa: babban matsin da aka inganta bututun ruwa na waje diamita 16 mm, diamita na ciki 12 mm mita da yawa

6, mashigar ruwan famfo da bututun ruwa: 1 inch (diamita na ciki 25 mm) a cikin babban matsin wutan da aka ƙarfafa bututu da yawa

Eight , 200KG medium frequency copper melting furnace use operation steps :

1, haɗin lantarki: samun dama ga layin samar da wutar lantarki da aka keɓe, bi da bi, sauyin iska sau uku. Sa’an nan kuma haɗa waya ta ƙasa. (Lura cewa ikon wutar lantarki mai hawa uku yakamata ya iya saduwa da amfani da kayan aikin, kuma yakamata a yi amfani da kaurin waya gwargwadon umarnin)

2, ruwa: (ya danganta da ci gaba da lokacin aiki da nauyin aiki) zaɓi tsarin ruwan sanyaya don cimma sanyaya ruwa.

3, ta cikin ruwa: buɗe hanyar ruwa, kuma bincika kayan aikin kowane ruwa don ganin ko akwai fitar ruwa, kwarara da matsin lamba na al’ada ne.

4, iko: da farko buɗe maɓallin wuta na sarrafawa, sannan buɗe maɓallin iska a bayan injin, sannan kunna maɓallin wuta akan kwamiti mai sarrafawa.

5. Farawa: Ya kamata a daidaita ƙarfin wutar lantarki potentiometer zuwa mafi ƙanƙanta kafin fara tanderun farko. Bayan farawa, yakamata a daidaita zafin jiki zuwa ikon da ake buƙata. Danna maɓallin farawa don fara injin. A wannan lokacin, mai nuna dumama akan allon yana haskakawa, da sautin saurin aiki na yau da kullun da walƙiyar aikin walƙiya lokaci guda.
6. Kulawa da auna zafin jiki: A lokacin aikin dumama, galibi an ƙaddara shi ta hanyoyin gani don sanin lokacin da za a daina dumama.

7. Kashewa: Kashewa, na’urar sarrafawa tana kashewa da farko, sannan ku kashe babban wutan lantarki na waje, sannan a jinkirta har zuwa kusan awa 1 bayan zafin wutar makera; sannan kashe kayan sanyaya ruwa, dumama cikin injin kuma don sauƙaƙe murfin shigarwa Ana fitar da zafi.
8. A yankin da yake da saukin daskarewa a lokacin hunturu, ya kamata a lura cewa bayan kowane amfani, yakamata a yi amfani da iska mai matsawa don busar da ruwa a ciki da kuma cikin kayan don hana ruwa tsinke kayan ciki da bututun ruwa a ciki. kayan aiki.

Nine, customer molten copper smelting scene pictures: