Epoxy gilashin fiber winding bututu

Epoxy gilashin fiber winding bututu da aka yi daga ukatse fiber rigar winding, musamman ɓullo da ga tsarin sassa na high-ƙarfin wuta lantarki kayan aiki kamar reactors, walƙiya arresters, fiusi, transformers, on-load famfo-canji, gidajen wuta, da dai sauransu The samfurin yi sigogi sigogi. cika ka’idojin IEC da ake buƙata.

Basic parameters of epoxy glass fiber winding pipe:

1: Winding kwana, 45 ~ 65 (za a iya daidaita kusurwar iska bisa ga buƙatun daban-daban don cimma buƙatun aikin injiniya mafi kyau);

2: Fiber abun ciki (nauyi rabo), 70 ~ 75%;

3: Girma, 2.00 g / cm3;

4: Yawan sha ruwa, ƙasa da 0.03%;

5: Ƙwararren Ƙwararrun Ƙwararrun Ƙwararrun Ƙwararru, 1.8 E-05 1 / K;

6: Gilashin canjin zafin jiki, 110 ℃ 120 ℃;

7: Juriya na sinadarai. Ma’adinai mai: mai kyau;

8: mai narkewa da tsarma acid: mai kyau;

9: Ƙwararren Ƙwararren Ƙwararren Ƙwararren Ƙwararren Ƙwararren Ƙwararren Ƙwararren Ƙwararren Ƙwararren Ƙwararren Ƙwararren Ƙwaƙwalwa 14000 MPa;

10: Ƙarfin ƙarfi; axial 280 MPa; kewaye 600 MPa;

11: Ƙarfin ƙarfi: 150 MPa;

12: Ƙarfin sassauƙa: 350 MPa a cikin jagorar axial;

13: Ƙarfin ƙwaƙwalwa: axial 240 MPa;

14: Izinin dangi 2-3.2;

15: Dielectric asarar factor 0.003-0.015;

16: Ƙarfin fitarwa na ɓangare ≤5;

17: Dielectric strength: axial 3～6 kV; radial 10～12 kV;

18: Tasirin walƙiya: 110 KV

19: Mitar wutar lantarki: 50 KV;

20: Matsayin juriya mai zafi: B, F, H

21: Diamita na ciki> 5mm; diamita na waje <300mm; tsawon <2000mm.

The above data is for reference only. The casing parameters we produce are customized for each customer’s needs

An fitar da samfuranmu zuwa Amurka, Jamus, Koriya ta Kudu, Japan, Turai, Rasha da sauran ƙasashe.

Our characteristics: According to your requirements, we can design insulating sleeves with various mechanical properties, heat resistance requirements, corrosion resistance grades, color requirements, turning processing (threads/holes/grooves, etc.), and various smoothness of the inner and outer surfaces!