ahaziri gburugburu ígwè mmanya quenching na tempering mmepụta akara

Ogwe nchara gburugburu quenching na tempering mmepụta ahịrị na-atụ aro site na-emepụta akwa-mere gburugburu ígwè mmanya quenching na tempering mmepụta akara dị ka ọdịdị na mkpa nke ndị ahịa.

Main teknuzu paramita nke gburugburu ígwè mmanya quenching na tempering okpomọkụ ọgwụgwọ akụrụngwa:

1. Ike ọkọnọ usoro: quenching ike ọkọnọ + tempering ike ọkọnọ

2. Ihe mmepụta kwa elekere bụ 0.5-3.5 tọn, na njedebe nke ngwa dị n’elu ø20-ø120mm.

3. Conveying roller table: The axis of the roller table and the axis of workpiece etolite n’akuku nke 18-21 °. The workpiece na-atụgharị mgbe ọ na-aga n’ihu na ọsọ ọsọ mgbe niile iji mee ka ikpo ọkụ dịkwuo edo. Tebụlụ rola n’etiti ahụ ọkụ bụ nke 304 igwe anaghị agba nchara na mmiri jụrụ oyi.

4. Roller table grouping: otu nri nri, ihe mmetụta na ndị na-ebugharị na-achịkwa onwe ha, nke na-eme ka ikpo ọkụ na-aga n’ihu n’emeghị ka ọdịiche dị n’etiti workpieces.

5. Okpomọkụ mechiri emechi-loop njikwa: ma quenching na tempering nakweere American Leitai infrared temometa mechiri emechi-loop akara usoro iji jikwaa nke ọma okpomọkụ.

6. Industrial kọmputa usoro: ezigbo oge ngosi nke ugbu a na ọnọdụ nke na-arụ ọrụ parameters, workpiece oke ebe nchekwa, nchekwa, obibi, mmejọ ngosi, mkpu na ndị ọzọ ọrụ.

7. Ntughari ike: na-eji usoro quenching + tempering, ike oriri kwa ton bụ ogo 280-320.

8. Human-igwe interface PLC akpaka ọgụgụ isi akara usoro, “otu-isi mmalite” mmepụta nchegbu-free.

Ngwakọta ahịrị nchara gburugburu na-emenyụ ọkụ na tempering mmepụta akara:

1. Quenching + tempering IGBT okpukpu abụọ induction ike ọkọnọ:

2. Quenching + tempering induction kpo oku oku ahu

3. Ogbe nchekwa

4. Usoro nnyefe

5. Quenching mmiri tank (gụnyere igwe anaghị agba nchara ịgba mgbanaka, eruba mita na ugboro ntụgharị rola)

6. Tempering ọkụ kabinet (gụnyere igwe anaghị agba nchara anwụrụ, dual-ugboro capacitor kabinet otu, ugboro mgbanwe mbanye)

7. Ịnata akwa

8. Man-igwe interface PLC master console

9. Infrared okpomọkụ nha na akpaka okpomọkụ akara ngwaọrụ

Uru nke gburugburu ígwè mmanya quenching na tempering mmepụta akara:

1. Ọ na-anabata IGBT ọhụrụ ikuku jụrụ oyi na-ekpo ọkụ ọkụ ọkụ ọkụ, obere ike oriri, nchekwa ike na nchebe gburugburu ebe obibi, na mmepụta mmepụta ihe dị elu.

2. The gburugburu ígwè mmanya quenching na tempering mmepụta ahịrị mere site Yuantuo adopts V-ekara mpịakọta ndokwa diagonally na nnyefe imewe iji belata radial runout.

3. The induction kpo oku akụrụngwa nwere ngwa ngwa kpo oku ọsọ, obere elu oxidation, quenching na tempering usoro na roting kpo oku usoro, na ígwè nwere ezi straightness na ọ dịghị ekwe mgbe quenching na tempering.

4. Mgbe ọgwụgwọ okpomọkụ gasịrị, workpiece nwere nguzosi ike nke oke ike siri ike, ịdị n’otu nke microstructure, oke ike siri ike na ike mmetụta.

5. The PLC ihuenyo mmetụ akara usoro nwere ike idekọ na-azọpụta niile usoro parameters nke induction hardening na tempering nke workpiece.