Anchor rod induction heating quenching and tempering heat treatment production line

The application of bolt reinforcement technology in engineering is very extensive. At present, it has been developed in the application of ground anchoring in underground engineering, slope engineering, structural anti-floating engineering, deep foundation pit engineering, gravity dam reinforcement engineering, bridge engineering, and anti-overturning and seismic engineering. In recent years, my country’s ongoing large-scale infrastructure construction including high-speed railways, cross-sea bridges, subsea tunnels, subways, wind power, etc. encountered foundation treatment, slope reinforcement, underground space structure reinforcement, and underwater space structure solidification. Among the various problems, the method of reinforcing the anchor rod has been greatly expanded. Like other quenching and tempering, the induction quenching and tempering heat treatment production line is mainly to improve the mechanical properties of the bolt and obtain the desired sorbite structure.

프로젝트 소개 :

Independent research and development, production and manufacturing. This quenching and tempering heat treatment production line consists of two parts: quenching and tempering; the quenching heating part is composed of two sets of intermediate frequency power supplies with different powers and multiple sets of heating induction coils. The total power of the quenching part is 750Kw, the total power of the tempering part is 400Kw, and the bus length reaches 38.62. M, the spray part is composed of three groups of spray circles.

Process and technical parameters:

바 직경 범위(mm): Φ30-65

바 길이 범위(mm): 2000-7500

Bar material: 45, 40Cr, 42CrMo, etc.

담금질 온도: 750-1200℃

템퍼링 온도: 500-900℃

Hardness range: 25-40HRC

최대 생산 능력: 2t/h

The final hardness uniformity is required to be ±10HB. On the basis of the straightness of the raw material, the straightness of the bar after quenching and tempering is required to be less than 1mm/m.

분무 링은 완전 밀폐형을 채택하여 분무액이 튀는 것을 방지하고 분무수의 역류에도 도움이 됩니다. 등급 스프레이 장치의 상대 위치는 조정 가능하며 스프레이 물이 튀는 것을 방지하기 위해 냉각액을 회수하기 위한 섬프가 있습니다. 스프레이 시스템의 각 레벨에는 독립적인 워터 펌프와 전자 유량계가 있어 제어할 수 있습니다.

Anchor rod induction heating quenching and tempering heat treatment production line

The application of bolt reinforcement technology in engineering is very extensive. At present, it has been developed in the application of ground anchoring in underground engineering, slope engineering, structural anti-floating engineering, deep foundation pit engineering, gravity dam reinforcement engineering, bridge engineering, and anti-overturning and seismic engineering. In recent years, my country’s ongoing large-scale infrastructure construction including high-speed railways, cross-sea bridges, subsea tunnels, subways, wind power, etc. encountered foundation treatment, slope reinforcement, underground space structure reinforcement, and underwater space structure solidification. Among the various problems, the method of reinforcing the anchor rod has been greatly expanded. Like other quenching and tempering, the induction quenching and tempering heat treatment production line is mainly to improve the mechanical properties of the bolt and obtain the desired sorbite structure.

프로젝트 소개 :

Independent research and development, production and manufacturing. This quenching and tempering heat treatment production line consists of two parts: quenching and tempering; the quenching heating part is composed of two sets of intermediate frequency power supplies with different powers and multiple sets of heating induction coils. The total power of the quenching part is 750Kw, the total power of the tempering part is 400Kw, and the bus length reaches 38.62. M, the spray part is composed of three groups of spray circles.

Process and technical parameters:

바 직경 범위(mm): Φ30-65

바 길이 범위(mm): 2000-7500

Bar material: 45, 40Cr, 42CrMo, etc.

담금질 온도: 750-1200℃

템퍼링 온도: 500-900℃

Hardness range: 25-40HRC

최대 생산 능력: 2t/h

The final hardness uniformity is required to be ±10HB. On the basis of the straightness of the raw material, the straightness of the bar after quenching and tempering is required to be less than 1mm/m.

분무 링은 완전 밀폐형을 채택하여 분무액이 튀는 것을 방지하고 분무수의 역류에도 도움이 됩니다. 등급 스프레이 장치의 상대 위치는 조정 가능하며 스프레이 물이 튀는 것을 방지하기 위해 냉각액을 회수하기 위한 섬프가 있습니다. 스프레이 시스템의 각 레벨에는 독립적인 워터 펌프와 전자 유량계가 있어 제어할 수 있습니다.