Medium frequency induction heating equipment

Model: GS-ZP-200kw

permohonan:

1. Pemanasan keluli bulat dan batang dengan diameter lebih daripada 50mm;

2. Heat treatment of bucket teeth;

3. Annealing and heat treatment of steel plate and wire rod;

4. Quenching heat treatment of various shafts, gears, etc.;

5. Metal smelting;

Prinsip kerja peralatan pemanasan aruhan frekuensi pertengahan:

The medium frequency induction heating equipment adopts the principle of electromagnetic induction heating. The alternating magnetic field is generated by the inductor to generate the induced current of the same frequency. The uneven distribution of the induced current on the workpiece makes the surface of the workpiece strong and weak inside, until the heart is close to 0. So as to achieve the purpose of heating.

Performance characteristics of intermediate frequency induction heating equipment:

1. Saiz kecil, ringan, pemasangan sederhana dan operasi yang sangat mudah;

2. The equipment has a unique cooling cycle system to ensure that the equipment works continuously for 24 hours;

3. Kecekapan tinggi dan penjimatan kuasa yang jelas, penjimatan kuasa 60% berbanding dengan peralatan tradisional, dan penjimatan kuasa 20% berbanding dengan frekuensi pertengahan thyristor;

4. The output power is easy to adjust, the response speed is fast, the control is accurate, and the heating conditions can be arbitrarily selected;

5. It has a complete protection system for overvoltage, overcurrent, undervoltage, water shortage, phase loss, pressure limiting, current limiting, etc., so as to ensure the reliability and working stability of the equipment;

6. Low failure rate, low working voltage (380V), high safety factor, convenient use, inspection and maintenance;

Kelebihan unik peralatan pemanasan aruhan frekuensi pertengahan:

1) The workpiece does not need to be heated as a whole, and it can be selectively heated locally, so the power consumption is small and the deformation of the workpiece is small. To

2) The heating speed is fast, which can make the workpiece reach the required temperature in a very short time, even within 1 second, so that the surface oxidation and decarburization of the workpiece are lighter, and most of the workpieces do not need gas protection.

3) Intermediate frequency induction heating equipment can heat all kinds of workpieces and has a wide range of applications;

4) The equipment is easy to install on the production line, easy to realize mechanization and automation, easy to manage, and can effectively reduce transportation, save manpower, and improve production efficiency.

5) Induktor dapat diganti secara bebas, sehingga peralatan dapat menyelesaikan proses perlakuan panas seperti pelindapkejutan, penyepuhlindapan, pengawetan, menormalkan, dan pelindapkejutan dan pembajaan, serta pengelasan, peleburan, pemasangan termal, pembongkaran termal, dan pemanas membentuk.

6) Bahan kerja sekunder boleh dipanaskan dengan cepat pada bila-bila masa untuk memenuhi keperluan teknologi.

7) Lapisan pengerasan permukaan dapat dikendalikan dengan menyesuaikan frekuensi kerja dan kekuatan peralatan seperti yang diperlukan, sehingga struktur martensit lapisan mengeras lebih halus dan kekerasan, kekuatan dan ketangguhan relatif tinggi.

Peralatan pemanasan aruhan frekuensi sederhana banyak digunakan:

1. Pembentukan Diathermy

A. Hot rolling and hot rolling of various standard fasteners and other mechanical parts, hardware tools, and straight shank twist drills.

B. Heat and anneal metal materials for stretching, embossing, etc.

2. Rawatan haba

All kinds of hardware tools, electric, hydraulic, pneumatic components, auto parts, motorcycle parts and other mechanical technology parts of the surface, inner hole, partial or overall quenching, annealing, tempering, etc. Such as the quenching of hammers, knives, scissors, pliers and various shafts, sprockets, gears, valves, ball pins, etc.

3. Brazing

Welding of various types of hard alloy cutter heads, turning tools, milling cutters, planers, reamers, diamond saw blades, and saw teeth. Welding of abrasive tools, drilling tools, and cutting tools. Compound welding of other metal materials, such as brass, red copper parts, valves, stainless steel pot bottoms, etc.

4. Metal smelting

Such as smelting gold, silver, copper, etc.

5. Other heating fields

Heating coating of plastic pipes, cables and wires. Aluminum foil sealing used in food, beverage, and pharmaceutical industries, metal preheating expansion, etc.