Ukucima ibha kunye nomgangatho wokuvelisa ubushushu

Ku

Main technical parameters of bar quenching and tempering production line:

1. Inkqubo yonikezelo lwamandla: ukucima unikezelo lwamandla + unikezelo lwamandla obushushu

2. The output per hour is 0.5-3.5 tons, and the scope of application is above ø20-ø120mm.

3. Ukuhambisa itafile ye-roller: I-axis yetafile ye-roller kunye ne-axis ye-workpiece yenza i-angle ye-18-21 °. Umsebenzi ojikelezayo ujikeleza ngelixa uqhubela phambili kwisantya esiqhubekayo ukwenza ukufudumeza kufane. Itheyibhile ye-roller phakathi kwemizimba yesithando somlilo yenziwe nge-304 non-magnetic steel stainless and water-cooled.

4. Iqela letafile ye-roller: iqela lokutyisa, iqela le-sensor kunye neqela lokukhupha lilawulwa ngokuzimeleyo, elihambelana nokufudumala okuqhubekayo ngaphandle kokubangela i-gap phakathi kwezinto zokusebenza.

5. Iqondo lokushisa elivaliweyo lokulawula i-loop: zombini ukucima kunye nokufudumala kwamkela i-American Leitai ye-infrared thermometer evaliweyo inkqubo yokulawula i-loop ukulawula ngokuchanekileyo ubushushu.

6. Industrial computer system of quenching and tempering heat treatment equipment: real-time display of the status of working parameters at the time, and functions of workpiece parameter memory, storage, printing, fault display, alarm and so on.

7. Energy conversion: using quenching + tempering method, power consumption per ton is 280-320 degrees.

8. Human-machine interface PLC automatic intelligent control system, “one-key start” production worry-free.

Advantages of the bar quenching and tempering production line:

I-1. Yamkela i-IGBT entsha yokulawula ukufudumala kwe-air-cooled induction, ukusetyenziswa kwamandla aphantsi, ukugcinwa kwamandla kunye nokukhuselwa kwendalo, kunye nokusebenza kakuhle kwemveliso.

2. The bar material quenching and tempering production line designed by Yuantuo adopts V-shaped rolls arranged diagonally in the transmission design to reduce radial runout.

3. Isantya sokufudumeza ngokukhawuleza, i-oxidation engaphantsi komhlaba, ukucima kunye nenkqubo yokufudumala kwinkqubo yokufudumala ejikelezayo, kwaye intsimbi inokulungeleka kakuhle kwaye akukho ukugoba emva kokucima kunye nokufudumala.

4. Emva konyango lobushushu, i-workpiece inokuhambelana kobunzima obuphezulu kakhulu, ukufana kwe-microstructure, ukuqina okuphezulu kakhulu kunye namandla empembelelo.

5. The PLC touch screen control system can record and save all the process parameters of induction hardening and tempering of the workpiece, which is convenient for you to view the historical records in the future.