Tungsten-molybdenum etiti oge ọkụ ọkụ na-ekpo ọkụ – hydrogen sintering ọkụ, ọkara ugboro sintering ọkụ emeputa

Isi nhọrọ nhọrọ nke tungsten-molybdenum intermediate ugboro sintering ọkụ, mejupụtara tungsten-molybdenum intermediate ugboro sintering ọkụ, nkọwa nke sintering ọkụ, ihe na-ekpo ọkụ na-eji tungsten-rhenium kpo oku mmewere, ọkara ugboro sintering oku emeputa.

Tungsten-molybdenum n’etiti ọkụ ọkụ na-agbapụta ugboro ugboro

Ọkụ n’etiti tungsten-molybdenum bụ nke mejuputara site na ọkọnọ ike nke etiti thyristor, ọkụ ikuku hydrogen na sistemụ njikwa okpomọkụ akpaka. Ihe mejupụtara akụkụ nke ọ bụla bụ nke a:

The thyristor intermediate frequency power supply consists of KGPS-350/2.5 350KW 2.5KHz power supply cabinet, electric heating capacitor cabinet, connecting copper bars and engine mechanism;

Igwe ọkụ na-ekpo ọkụ bụ nke tank tank, inductor, alumina, zirconia refractory material, tank mmiri na-alaghachi azụ, mmiri hydrogen / nitrogen na-achịkwa valvụ na-achịkwa osisi, na nnukwu ọkụ ọkụ;

A na-atụ sistemụ njikwa akpaka okpomọkụ site na Wre5-26 thermocouple, nke onye na-ahụ maka ọnọdụ okpomọkụ na-achịkwa, ma onye na-edekọ dekọọ ya. A na-etinye usoro njikwa niile na kọnsụl na-arụ ọrụ kabinet maka njikwa. Nhazi zuru oke bụ nke a:

1 , ọkara ugboro ike ọkọnọ KGPF350KW/2.5 1 set

2, IF ogbo resonant capacitor bank

3, ihe mmetụta 1 set

4 , sintering furnace body               1 set

5, inductor na capacitor jikọọ n’etiti ọla kọpa na engine usoro 1 set

6, Wre5-26 thermocouple 1 set

7, ngwa njikwa okpomọkụ PID 2

8, temometa infrared Taiwan

9 , laghachi mmiri tank (na mmiri okpomọkụ ule table) 1 set

10, 1 set nke eriri, ogwe ọla kọpa, wdg achọrọ maka njikọ n’etiti ngwaọrụ dị iche iche

11 , ihe mgbagha 1 set

12 , gantry 1 set

13 , eruba ịmafe valvụ efere 1 set

14 , paperless recorder               1 set

15 , kabinet na-arụ ọrụ 1 set

Main selection parameters of tungsten-molybdenum intermediate frequency sintering furnace

Maximum use size: diameter φ 560 mm height 1200mm thickness

Okpomọkụ kachasị elu: ọ bụghị ihe na-erughị 2200 Celsius

Izi ezi njikwa okpomọkụ: ± 10 Celsius

Oke ike: 350KW

Working frequency: 2500Hz

Nleta okpomọkụ akpaaka, ngosi, ndekọ akpaka

Nchekwa hydrogen n’ime ọkụ ọkụ, ihe nkwụnye mmiri na-agbanwe agbanwe, nkwụsị slag

N’ịfefe oke, oke voltaji, mfu nke oge, oke mmiri na-erughị oke, oke okpomọkụ, nchebe ọdịda ike

Ndepụta nke ihe ndị bụ isi nke tungsten-molybdenum n’etiti ọkụ ọkụ na-agbapụta ugboro ugboro:

According to the 350KW , 2500Hz intermediate frequency power supply, select the following components:

Rectifier thyristor KP800A/1200V ụlọ ọrụ akụrụngwa Xiangfan

Inverter thyristor KK800A/1600V; Ụlọ ọrụ akụrụngwa Xiangfan

Mgbanwe ikuku akpaaka DZ20-1000A; Huanyu Electric

Ngwa ngwa ngwa 800A / 500V; Ụlọ ọrụ Long Shen

Board Control ọgbọ nke ise Full Digital Programmable Logic Array Control Board

Ụdị kabinet ike GGD n’ihu na azụ ụzọ ụzọ abụọ,

Igwe ọkụ eletrik RFM2-0.75-1000-2.5S Zhejiang Xin’anjiang Power Capacitor Co., Ltd.

Tungsten-rhenium thermocouple 0- 22 00 °C

9. temometa infrared Femtosecond Optoelectronics Technology (Xi’an) Co., Ltd.

10. Akụkụ njikwa akụrụngwa:

10.1. Ihe ndekọ na-enweghị akwụkwọ

10.2.ID temperature adjustment instrument FP21-1 (4)I006

Nkọwa nka nka nke tungsten-molybdenum intermediatefrequency sintering oven

1. SCR intermediate frequency power supply: Its main features should meet the following requirements:

Control system is fully digital, no relay control

The control system uses ISP programmable logic array template integrated control.

1.2 Ọnọdụ mmalite nyocha pụrụ iche yana ọnụego ọganihu mmalite 100%.

Enwere ntụkwasị obi dị elu na nkwụsi ike dị elu

1.4 ike ọkọnọ ike mgbe niile mmepụta ike, na-ekwe nkwa ihe ike dị elu

1.5 perfect and reliable protection

A ga-enye sekit na-achịkwa ihe nchebe dị iche iche dị ka ihe na-emebiga ihe ókè, oke voltaji nke etiti oge, nkwụsị nke oge, nkwụsị nke bọọdụ nchịkwa nchịkwa, obere mmiri na-eme ka mmiri dị jụụ, na mmiri oyi dị elu, na ụda ụda kwekọrọ na ọkụ ọkụ na-enye.

Advanced phase sequence self-identification

Sistemụ njikwa nwere sekit njirimara onwe nke usoro nke usoro, yana ike na-abịa na nkeji atọ nwere ike jikọọ aka ike.

1.7 Okpomọkụ mechiri emechi akara njikwa:

A na-enye ndị na-enye ike na njikwa njikwa okpomọkụ dị n’èzí, jikọtara ya na PLC mpụga, temometa infrared ma ọ bụ thermocouple na ngwa njikwa okpomọkụ nke PID, nke nwere ike ịghọta ọnọdụ okpomọkụ na ike mechiri emechi-loop njikwa usoro, nke mere na kpo oku. A na-edozi okpomọkụ nke workpiece na-akpaghị aka na ntọala ngwá ọrụ. Ọnụ ahịa gbakọrọ.

1.8 reliable and safe overall silicon frame installation form

1.9 use GGD cabinet

Ihe mkpuchi ụdị GGD na nchikota nke kabinet nke oyi kpụrụ, ihe niile na-eduzi kọntaktị na-ebupụta ọkụ nke ime ugboro ugboro jikọtara ya na tin na-egbuke egbuke nke nwere ọla kọpa zuru oke nke 10-15 μm.

1. 10 Ọrụ ịchọpụta okpomọkụ nke mmiri ọ bụla na-akwụsị ozugbo mgbe ọdịda mere.

1. 11 Ọ nwere mpụga shutdown interface na-akwụsị mgbe interface na-emechi.

2. Sensọ eriri igwe

2.1 Iji belata tank ugbu a ma belata mfu nke inductor, a na-emepụta eriri induction ka ọ na-ebuli elu.

2.2 Injin ọpụpụ bụ naanị abụọ.

2.3 A na-ekpuchi kọlụm eriri igwe site na karama poselin n’etiti kọlụm igwe anaghị agba nchara na eriri igwe.

2.4 A na-efesa elu nke eriri igwe na resin itching iji gbochie ntinye nke uzuzu ígwè ma melite ike mkpuchi.

2.6 Mgbe ikuku nke hydrostatic ule 0.6MPa / 30min, na-eme ka eriri mmiri na-adịghị.

3. Usoro njikwa na kabinet ọrụ

A na-ejikarị panel arụ ọrụ eme ihe maka ọrụ eletriki na njikwa ọkụ ọkụ, njikwa okpomọkụ nke ndekọ.

3.1 The operation cabinet adopts a vertical structure, and the operation cabinet is a front and rear door opening structure. Flanking a small hole, so that the infrared, thermocouple and signal cables into the associated frequency power supply leads.

3.2 The kabinet na-onwem na ọnụ ngọngọ (gụnyere mapụtara ọnụ), ikuku mgbanwe, ịgbanwee ike ọkọnọ na ndị ọzọ components. Onye na-ahụ maka ọkụ na-agbanwe agbanwe bụ ± 12VDC, nke a na-eji na-enye ike na temometa infrared. Na enwere oghere ike nke okpukpu abụọ maka ndị ọrụ na-arụ ọrụ na-arụ ọrụ.

3.3 The mesa na-onwem na anọ intermediate ugboro tebụl gosiri nke etiti ugboro voltaji, DC voltaji, DC ugbu na ike ugboro ugboro.

3.4 A na-atụ ma na-achịkwa nha okpomọkụ site na thermocouple na infrared:

3.4.1. Infrared meter:

A na-etinye ihe nrịbama infrared n’elu ihe nrịbama nke nwere ike ịmegharị akụkụ atọ, a na-etinye ihe nhazi mgbaàmà n’akụkụ mkpuchi ọkụ, na njikwa akara na njikwa ọrụ na-ejikọta ya na eriri mkpuchi.

3.5. Onye na-edekọ ihe na-anabata ọgbọ ọhụrụ nke enweghị akwụkwọ. 3.6. Gbanwee na egosi: Mgbanwe na egosi na ngosi njikwa ma mebie mmejọ n’otu n’otu, akpaka / aka

Dynamic, thermocouple / infrared, njikwa njikwa, mmalite na nkwụsị nke ọkara, mgbanwe ọkụ na ọrụ ndị ọzọ.

3.7 Ngwa njikwa okpomọkụ PID: Igwe a na-ahọrọ ụdị abụọ nke ngwa njikwa okpomọkụ PID nwere otu ọrụ. Ọ bụ ụdị FP21 nke SHIMADEN CO., LTD. A na-eji otu n’ime ha maka njikwa okpomọkụ nke thermocouple, na nke ọzọ. Eji maka njikwa okpomọkụ infrared.

4, ahụ ọkụ na-ekpo ọkụ

Ahụ ọkụ: akwa abụọ n’ime na n’èzí, a na-agbado oyi akwa nke mpụta site na ihe ịgbado ọkụ 10mm gbara ọkpụrụkpụ 16Mn. 8mm oké n’ime oyi akwa na-welded 1Cr18Ni9Ti, ụba ume ogwe, iji gbochie oké mmiri mgbali ọkụ liner deformed n’ime na elu n’ígwé, n’etiti na ala.Internally welded na mpịachi pedals: ndokwa na abụọ n’ígwé nke na-ezighị ezi , nke nwere ike iji ndị ọrụ maka loading. na nbudata. N’ihi squat dị elu, a na-ahazi pedals n’ụdị abụọ, na-eji ụkwụ ụkwụ atọ n’ala nke ọ bụla na ala ala maka ndị ọrụ na-eburu elu elu. A na-eji ihe eji eme ihe, onye na-arụ ọrụ na-ejikwa obere oyi akwa. Mgbe ejirichara ya, tụgharịa pedal ụkwụ ka ọ ghara ikpo ọkụ site na ihe mmetụta.

5, oche ọrụ:

Gantry work surface height from the ground 1. 8 M, from the height of the furnace opening 0.6M, 2.9M overall height. Fenced outside, the middle set Buti, Buti worktop surface and the tread plate is made of non-slip. A hydrogen and nitrogen control box is arranged on the side of the step ladder, and a rotor flow meter and a gas switching valve are arranged inside to switch the gas and adjust the flow rate. The gantry is made detachable and separated along the diameter of the furnace body, and the furnace body is placed. Once in place, close the stand and tighten with bolts.

6, ahụ ọkụ

A na-eji ihe na-ekpo ọkụ tungsten na-ekpo ọkụ na-ekpo ọkụ na-ekpo ọkụ site na ikpo ọkụ induction, mgbe ahụ, ihe a ga-ekpo ọkụ na-ekpo ọkụ.

This set of equipment has a tungsten crucible size of φ 560 × 1200 . Wall thickness:

7 , ihe mgbagha

Ihe na-atụgharị n’etiti inductor na tungsten crucible bụ aluminum oxide na zirconium oxide.