Gabatarwa zuwa kayan aikin injina na bututun jan ƙarfe shigar da layin samar da ci gaba da annealing

Naúrar ta ƙunshi na’ura mai kwancewa, madauki mai buɗewa, abin nadi a kwance, na’urar tsaftacewa, na’urar daidaitawa, injin jan hankali, na’urar riga-kafi, na’urar juyawa da tsarin sarrafa lantarki.

1. Injin cire wutar lantarki: Ya ƙunshi motar motsa jiki, mai ragewa, firam, tiren abu da na’urar birki. An ba da izinin sanya Φ3050X800mm (1500 mm) babban kayan kayan aiki don na’ura mai zana na’ura a kan tire na kayan, kuma ana amfani da bututu mai laushi a matsayin albarkatun kasa na bututun da za a yi rauni.

Motar mai kwance: AC m Y112M-4 5.5KW 1440r/min.

2. Unwinding looper: Ya ƙunshi sashi, hannu mai goyan baya, abin nadi mai goyan baya, abin nadi a tsaye, hannun lilo da sauran abubuwan haɗin gwiwa. Yana goyan bayan bututun zuwa wani tsayin daka ta hanyar abin nadi mai goyan baya, kuma abin nadi na tsaye yana jagorantar bututun kuma yana gabatar da tsintsiya madaurinki a kwance daga tire A kan nadi. Gudun jujjuyawar faifan buɗewa yana ta hanyar kusurwar jujjuyawar hannu, kuma ana amfani da nau’ikan gear guda biyu don ƙara girman juzu’in, shigar da tsarin kwamfuta, daidaita mitar, da sarrafa saurin jujjuyawar na’urar don cimma nasara. da sauri aiki tare da dukan inji. Ana amfani da magudanar ruwa don sarrafa saurin kusurwar lilo kuma ana iya daidaita ƙarfin bazarar torsion da saita gwargwadon girman diamita na bututu.

3. Hannun rollers na kwance: ana amfani da nau’i-nau’i biyu na nadi a kwance don ciyar da bututu a cikin na’urar tsaftacewa, kuma duk nau’i-nau’i biyu na rollers na tsunkule ana tuka su da sauri.

4. Na’urar tsaftacewa: Ana amfani da ita ne musamman don tsaftace tarkace da ƙura a saman bututun da ba kowa. Matsakaicin tsaftacewa shine wakili mai tsaftacewa na bututun jan karfe, wanda tashar famfo mai tsaftacewa ke bayarwa kai tsaye. An rufe dukkan tsarin tsaftacewa.

5. Na’urar daidaitawa: Ya ƙunshi na’ura mai daidaitawa a tsaye da na’ura mai daidaitawa a kwance. Haɗin tasirin biyu yana sa bututun jan ƙarfe ya daidaita. Dukansu injunan daidaitawa a tsaye da a kwance suna miƙewa nadi tara mai aiki, an ƙayyadadden abin nadi guda huɗu, kuma ana iya daidaita abin nadi biyar daban-daban ta dabaran hannu.

6. Nau’in jan hankali: tsunkule na nau’in crawler.

7. Karɓar na’urar: Ya ƙunshi abu juya inji, katako, abu frame, da dai sauransu Bayan tube blank ne sawn kashe, da raya feed abin nadi accelerates da tube blank zuwa juya inji, da tsawon fitarwa nadi tebur ne mafi girma. fiye da 4m, sa’an nan kuma an juya bututun da aka gama a cikin firam ɗin kayan gaba.

8. Tsarin kula da wutar lantarki: yana ɗaukar ikon sarrafawa na tsakiya na PLC, yana ɗaukar fasahar sauya mitar AC don sarrafa farawa, dakatarwa, haɓakawa da raguwar motsin motsi da ciyarwa, kuma ana sarrafa shi ta tsarin AC servo da tsarin sarrafawa na relay. Tsarin kula da wutar lantarki yana kunshe da majalisar sarrafa wutar lantarki, tebur mai aiki da akwatin aiki.

9. Na’ura mai aiki da karfin ruwa tsarin: yafi amfani ga dagawa Silinda na Winding kayan tebur.

10. Sashin sanyaya ruwa: Ana sanyaya bututun jan karfe zuwa yanayin zafi na yau da kullun ta hanyar sassa biyu na sanyaya sanyaya da sanyaya nutsewa. Za’a iya sarrafa zafin jiki na bututun jan karfe da ke fitowa daga tanki mai sanyaya ta hanyar daidaita yawan ruwa. Mafi yawan zafin jiki shine 60 ~ 80 ℃.

11. Biya-kashe na’ura mai ba da hanya tsakanin hanyoyin sadarwa: kashe-kashe na agogo, ɗaukar matakin ɗaukar hoto: madaidaiciyar madaidaiciyar hanya.

https://songdaokeji.cn/13909.html

https://songdaokeji.cn/13890.html