Tungsten-molybdenum intermediate frequency sintering furnace – hydrogen sintering furnace , medium frequency sintering furnace manufacturer

Isi nhọrọ nhọrọ nke tungsten-molybdenum intermediate ugboro sintering ọkụ, mejupụtara tungsten-molybdenum intermediate ugboro sintering ọkụ, nkọwa nke sintering ọkụ, ihe na-ekpo ọkụ na-eji tungsten-rhenium kpo oku mmewere, ọkara ugboro sintering oku emeputa.

Tungsten-molybdenum n’etiti ọkụ ọkụ na-agbapụta ugboro ugboro

Ọkụ n’etiti tungsten-molybdenum bụ nke mejuputara site na ọkọnọ ike nke etiti thyristor, ọkụ ikuku hydrogen na sistemụ njikwa okpomọkụ akpaka. Ihe mejupụtara akụkụ nke ọ bụla bụ nke a:

The thyristor intermediate ugboro ike ọkọnọ mejupụtara KGPS-350/2.5 350KW 2.5KHz ike ọkọnọ kabinet, electric okpomọkụ capacitor kabinet, jikọọ ọla kọpa Ogwe na engine usoro;

Igwe ọkụ na-ekpo ọkụ bụ nke tank tank, inductor, alumina, zirconia refractory material, tank mmiri na-alaghachi azụ, mmiri hydrogen / nitrogen na-achịkwa valvụ na-achịkwa osisi, na nnukwu ọkụ ọkụ;

A na-atụ sistemụ njikwa akpaka okpomọkụ site na Wre5-26 thermocouple, nke onye na-ahụ maka ọnọdụ okpomọkụ na-achịkwa, ma onye na-edekọ dekọọ ya. A na-etinye usoro njikwa niile na kọnsụl na-arụ ọrụ kabinet maka njikwa. Nhazi zuru oke bụ nke a:

1 , ọkara ugboro ike ọkọnọ KGPF350KW/2.5 1 set

2, IF ogbo resonant capacitor bank

3, ihe mmetụta 1 set

4 , sintering ọkụ ahụ 1 set

5, inductor na capacitor jikọọ n’etiti ọla kọpa na engine usoro 1 set

6, Wre5-26 thermocouple 1 set

7, ngwa njikwa okpomọkụ PID 2

8, temometa infrared Taiwan

9 , laghachi mmiri tank (na mmiri okpomọkụ ule table) 1 set

10, 1 set nke eriri, ogwe ọla kọpa, wdg achọrọ maka njikọ n’etiti ngwaọrụ dị iche iche

11 , ihe mgbagha 1 set

12 , gantry 1 set

13 , eruba ịmafe valvụ efere 1 set

14, onye na-edekọ enweghị akwụkwọ 1 set

15 , kabinet na-arụ ọrụ 1 set

Isi nhọrọ oke nke tungsten-molybdenum etiti etiti oge ọkụ ọkụ

Oke ojiji size: dayameta φ 560 mm elu 1200mm ọkpụrụkpụ

Okpomọkụ kachasị elu: ọ bụghị ihe na-erughị 2200 Celsius

Izi ezi njikwa okpomọkụ: ± 10 Celsius

Oke ike: 350KW

Ugboro ọrụ: 2500Hz

Nleta okpomọkụ akpaaka, ngosi, ndekọ akpaka

Nchekwa hydrogen n’ime ọkụ ọkụ, ihe nkwụnye mmiri na-agbanwe agbanwe, nkwụsị slag

N’ịfefe oke, oke voltaji, mfu nke oge, oke mmiri na-erughị oke, oke okpomọkụ, nchebe ọdịda ike

Ndepụta nke ihe ndị bụ isi nke tungsten-molybdenum n’etiti ọkụ ọkụ na-agbapụta ugboro ugboro:

Dị ka 350KW , 2500Hz etiti oge ọkọnọ ike, họrọ ndị a components:

Rectifier thyristor KP800A/1200V ụlọ ọrụ akụrụngwa Xiangfan

Inverter thyristor KK800A/1600V; Ụlọ ọrụ akụrụngwa Xiangfan

Mgbanwe ikuku akpaaka DZ20-1000A; Huanyu Electric

Ngwa ngwa ngwa 800A / 500V; Ụlọ ọrụ Long Shen

Board Control ọgbọ nke ise Full Digital Programmable Logic Array Control Board

Ụdị kabinet ike GGD n’ihu na azụ ụzọ ụzọ abụọ,

Igwe ọkụ eletrik RFM2-0.75-1000-2.5S Zhejiang Xin’anjiang Power Capacitor Co., Ltd.

Tungsten-rhenium thermocouple 0-22 00 Celsius

9. temometa infrared Femtosecond Optoelectronics Technology (Xi’an) Co., Ltd.

10. Akụkụ njikwa akụrụngwa:

10.1. Ihe ndekọ na-enweghị akwụkwọ

10.2.ID temperature adjustment instrument FP21-1 (4)I006

Nkọwa nka nka nke tungsten-molybdenum intermediatefrequency sintering oven

1. SCR intermediate ugboro ọkọnọ ike: Ya isi atụmatụ kwesịrị izute ndị a chọrọ:

Sistemụ njikwa bụ dijitalụ zuru oke, enweghị njikwa agbagharị agbagharị

Sistemụ njikwa na-eji njikwa ihe njikwa ihe omume ISP programmable logic array template agbakwunyere njikwa.

1.2 Ọnọdụ mmalite nyocha pụrụ iche yana ọnụego ọganihu mmalite 100%.

Enwere ntụkwasị obi dị elu na nkwụsi ike dị elu

1.4 ike ọkọnọ ike mgbe niile mmepụta ike, na-ekwe nkwa ihe ike dị elu

1.5 nchekwa zuru oke na ntụkwasị obi

A ga-enye sekit na-achịkwa ihe nchebe dị iche iche dị ka ihe na-emebiga ihe ókè, oke voltaji nke etiti oge, nkwụsị nke oge, nkwụsị nke bọọdụ nchịkwa nchịkwa, obere mmiri na-eme ka mmiri dị jụụ, na mmiri oyi dị elu, na ụda ụda kwekọrọ na ọkụ ọkụ na-enye.

Usoro usoro dị elu nke njirimara onwe ya

Sistemụ njikwa nwere sekit njirimara onwe nke usoro nke usoro, yana ike na-abịa na nkeji atọ nwere ike jikọọ aka ike.

1.7 Okpomọkụ mechiri emechi akara njikwa:

A na-enye ndị na-enye ike na njikwa njikwa okpomọkụ dị n’èzí, jikọtara ya na PLC mpụga, temometa infrared ma ọ bụ thermocouple na ngwa njikwa okpomọkụ nke PID, nke nwere ike ịghọta ọnọdụ okpomọkụ na ike mechiri emechi-loop njikwa usoro, nke mere na kpo oku. A na-edozi okpomọkụ nke workpiece na-akpaghị aka na ntọala ngwá ọrụ. Ọnụ ahịa gbakọrọ.

1.8 nke a pụrụ ịdabere na ya ma dị nchebe n’ozuzu ụdị nrụnye silicon frame

1.9 jiri GGD kabinet

Ihe mkpuchi ụdị GGD na nchikota nke kabinet nke oyi kpụrụ, ihe niile na-eduzi kọntaktị na-ebupụta ọkụ nke ime ugboro ugboro jikọtara ya na tin na-egbuke egbuke nke nwere ọla kọpa zuru oke nke 10-15 μm.

1. 10 Ọrụ ịchọpụta okpomọkụ nke mmiri ọ bụla na-akwụsị ozugbo mgbe ọdịda mere.

1. 11 Ọ nwere mpụga shutdown interface na-akwụsị mgbe interface na-emechi.

2. Sensọ eriri igwe

2.1 Iji belata tank ugbu a ma belata mfu nke inductor, a na-emepụta eriri induction ka ọ na-ebuli elu.

2.2 Injin ọpụpụ bụ naanị abụọ.

2.3 A na-ekpuchi kọlụm eriri igwe site na karama poselin n’etiti kọlụm igwe anaghị agba nchara na eriri igwe.

2.4 A na-efesa elu nke eriri igwe na resin itching iji gbochie ntinye nke uzuzu ígwè ma melite ike mkpuchi.

2.6 Mgbe ikuku nke hydrostatic ule 0.6MPa / 30min, na-eme ka eriri mmiri na-adịghị.

3. Usoro njikwa na kabinet ọrụ

A na-ejikarị panel arụ ọrụ eme ihe maka ọrụ eletriki na njikwa ọkụ ọkụ, njikwa okpomọkụ nke ndekọ.

3.1 The ọrụ kabinet nakweere a vetikal Ọdịdị, na ọrụ kabinet bụ a n’ihu na azụ ụzọ oghere Ọdịdị. Ịkụnye obere oghere, nke mere na infrared, thermocouple na eriri mgbama n’ime ọkụ ọkụ ugboro ugboro na-eduga.

3.2 The kabinet na-onwem na ọnụ ngọngọ (gụnyere mapụtara ọnụ), ikuku mgbanwe, ịgbanwee ike ọkọnọ na ndị ọzọ components. Onye na-ahụ maka ọkụ na-agbanwe agbanwe bụ ± 12VDC, nke a na-eji na-enye ike na temometa infrared. Na enwere oghere ike nke okpukpu abụọ maka ndị ọrụ na-arụ ọrụ na-arụ ọrụ.

3.3 The mesa na-onwem na anọ intermediate ugboro tebụl gosiri nke etiti ugboro voltaji, DC voltaji, DC ugbu na ike ugboro ugboro.

3.4 A na-atụ ma na-achịkwa nha okpomọkụ site na thermocouple na infrared:

3.4.1. Mita infrared:

A na-etinye ihe nrịbama infrared n’elu ihe nrịbama nke nwere ike ịmegharị akụkụ atọ, a na-etinye ihe nhazi mgbaàmà n’akụkụ mkpuchi ọkụ, na njikwa akara na njikwa ọrụ na-ejikọta ya na eriri mkpuchi.

3.5. Onye na-edekọ ihe na-anabata ọgbọ ọhụrụ nke enweghị akwụkwọ. 3.6. Gbanwee na egosi: Mgbanwe na egosi na ngosi njikwa ma mebie mmejọ n’otu n’otu, akpaka / aka

Dynamic, thermocouple / infrared, njikwa njikwa, mmalite na nkwụsị nke ọkara, mgbanwe ọkụ na ọrụ ndị ọzọ.

3.7 Ngwa njikwa okpomọkụ PID: Igwe a na-ahọrọ ụdị abụọ nke ngwa njikwa okpomọkụ PID nwere otu ọrụ. Ọ bụ ụdị FP21 nke SHIMADEN CO., LTD. A na-eji otu n’ime ha maka njikwa okpomọkụ nke thermocouple, na nke ọzọ. Eji maka njikwa okpomọkụ infrared.

4, ahụ ọkụ na-ekpo ọkụ

Ahụ ọkụ: akwa abụọ n’ime na n’èzí, a na-agbado oyi akwa nke mpụta site na ihe ịgbado ọkụ 10mm gbara ọkpụrụkpụ 16Mn. 8mm oké n’ime oyi akwa na-welded 1Cr18Ni9Ti, ụba ume ogwe, iji gbochie oké mmiri mgbali ọkụ liner deformed n’ime na elu n’ígwé, n’etiti na ala.Internally welded na mpịachi pedals: ndokwa na abụọ n’ígwé nke na-ezighị ezi , nke nwere ike iji ndị ọrụ maka loading. na nbudata. N’ihi squat dị elu, a na-ahazi pedals n’ụdị abụọ, na-eji ụkwụ ụkwụ atọ n’ala nke ọ bụla na ala ala maka ndị ọrụ na-eburu elu elu. A na-eji ihe eji eme ihe, onye na-arụ ọrụ na-ejikwa obere oyi akwa. Mgbe ejirichara ya, tụgharịa pedal ụkwụ ka ọ ghara ikpo ọkụ site na ihe mmetụta.

5, oche ọrụ:

Gantry na-arụ ọrụ elu elu site na ala 1. 8 M, site na elu nke ọkụ oghere 0.6M, 2.9M n’ozuzu elu. Fenced n’èzí, n’etiti set Buti, Buti worktop elu na tread efere na-mere nke na-abụghị slipping. A na-ahazi igbe nchịkwa hydrogen na nitrogen n’akụkụ ọkwa ọkwa, na a na-ahazi mita ntụgharị rotor na valvụ na-agbanwe gas n’ime iji gbanwee gas ma mezie ọnụego. A na-eme ka gantry dị ike ma kewaa ya na dayameta nke ahụ ọkụ ahụ, a na-etinyekwa ahụ ọkụ ahụ. Ozugbo ị bịarutere ebe ahụ, mechie ihe nkwụnye ahụ ma jiri bolts mechie ya.

6, ahụ ọkụ

A na-eji ihe na-ekpo ọkụ tungsten na-ekpo ọkụ na-ekpo ọkụ na-ekpo ọkụ site na ikpo ọkụ induction, mgbe ahụ, ihe a ga-ekpo ọkụ na-ekpo ọkụ.

Ngwa ngwa a nwere nha nke tungsten crucible φ 560 × 1200. Ọkpụrụkpụ mgbidi:

7 , ihe mgbagha

Ihe na-atụgharị n’etiti inductor na tungsten crucible bụ aluminum oxide na zirconium oxide.