Heat treatment process surface quenching

התקשות פני השטח

Some parts are subjected to alternating loads such as torsion and bending and impact loads when the workpiece is in the workpiece, and its surface layer bears a higher stress than the core. In the case of friction, the surface layer is constantly worn, so the surface layer of some parts requires high strength, high hardness, high wear resistance and high fatigue limit. Only surface strengthening can meet the above requirements. Because surface quenching has the advantages of small deformation and high productivity, it is widely used in production.

According to different heating methods, surface quenching mainly includes induction heating surface quenching, flame heating surface quenching, electrical contact heating surface quenching, etc.

Induction Heating Surface Hardening

Induction heating is to use electromagnetic induction to generate eddy currents in the workpiece to heat the workpiece. Compared with ordinary quenching, induction heating surface quenching has the following advantages:

1. The heat source is on the surface of the workpiece, the heating speed is fast, and the thermal efficiency is high;

2. Because the workpiece is not heated as a whole, the deformation is small;

3. The heating time of the workpiece is short, and the amount of surface oxidation and decarburization is small;

4. The surface hardness of the workpiece is high, the notch sensitivity is small, and the impact toughness, fatigue strength and wear resistance are greatly improved. It is beneficial to exert the potential of materials, save material consumption, a nd improve the service life of parts;

5. The equipment is compact, easy to use and good working conditions;

6. Facilitate mechanization and automation;

7. Not only used in surface quenching but also in penetration heating and chemical heat treatment.