site logo

Teknolohiya sa Produksyon ug Pag-uswag ug Paggamit sa Fiberglass Tube

Teknolohiya sa Produksyon ug Pag-uswag ug Paggamit sa Fiberglass Tube

Adunay tulo nga punoan nga lahi sa bildo nga fiber tube production processes: reciprocating filament winding process, continuous filament winding process and centrifugal casting process.

Reciprocating filament winding process (nahisakop sa fixed-length method): Niini nga proseso, ang dipping tank mobalos sa rotating mandrel, ug ang taas nga fiber glass filament gibutang sa usa ka oblique angle nga may kalabotan sa mandrel axis, ug ang auxiliary angle. (ie. Ang winding angle) gikontrolar sa ratio sa paglihok speed sa dipping tank ngadto sa rotational speed sa mandrel, ug ang translational kalihukan sa dipping tank kontrolado sa computerized electromechanical control. Ang gidaghanon sa mga winding layer anam-anam nga nadugangan hangtod maabot ang gidesinyo nga gibag-on sa dingding. Human makompleto ang winding, ang resin sa artikulo mamaayo na kaayo. Human sa pag-ayo, ang mandrel gikuha gikan sa fiberglass pipe.

Continuous filament winding process (belonging to continuous method): The process is that the tube passes through a feeding station that supplies resin pre-impregnated roving, chopped glass fiber reinforced plastic fiber and resin sand mixture in motion, and the tube is continuously advancing in the core mold. made in.

Centrifugal casting process (belonging to the fixed-length method): In this process, the cut glass fiber reinforced material and sand are fed into a steel mold fixed on the bearing, and the unsaturated resin with catalyst is injected into one end of the steel mold to make the steel mold. It impregnates the reinforcing material. Under the action of centrifugal force, the resin replaces the air in the fibers and fillers, thereby producing a dense composite material without pores. Due to the action of centrifugal force, the inner wall of the tube forms a smooth and clean resin-rich inner surface layer. Cures at higher temperatures. The pipe made by this method is also called glass fiber reinforced plastic sand pipe.