- 15
- Feb
Usoro njikwa kọmpụta chọrọ maka igwe anwụrụ ọkụ na-ebuli akụrụngwa kpo oku induction
Kọmputa akara usoro chọrọ maka ígwè anwụrụ okpomọkụ ịrị elu akụrụngwa ọkụ kpo oku:
1. Usoro njikwa mmụta onwe ya iji mezue nhazi onwe nke paramita:
First call the process recipe template to set the power, and then use the self-learning control method to complete the self-tuning of the parameters, and finally meet the control requirements of the system. After the steel pipe is heated, the temperature reaches 1100°C.
2. Use reliable and optimized control algorithms to achieve temperature closed-loop control:
The mmepụta akara adopts PLC akpaka okpomọkụ akara, onwem na atọ infrared thermometers, na nchọpụta okpomọkụ bụ n’etiti abụọ tent nke akụrụngwa, na ọnụ ụzọ na ụzọ ọpụpụ nke dum mmepụta ahịrị.
Igwe ọkụ infrared mbụ nke dị n’ọnụ ụzọ nke ọkụ ọkụ ahụ na-achọpụta ọnọdụ okpomọkụ nke mbụ nke ọkpọkọ ígwè tupu ya abanye na ọkụ ọkụ ọkụ, ma na-azụ ya na usoro nchịkwa okpomọkụ nke ngwa ngwa mbụ, nke mere na mmepụta ike na-emezu ihe a chọrọ. nke 60% nke ikpeazụ okpomọkụ nke ígwè ọkpọkọ (dị ka n’ezie Ntọala), a nke abụọ infrared temometa arụnyere na ntinye nke oku ozu nke mbụ set nke akụrụngwa na ntinye nke induction ọkụ ahụ nke abụọ set nke abụọ. akụrụngwa iji chọpụta ọdịiche dị n’etiti okpomọkụ dị n’etiti ezigbo oge okpomọkụ nke ọkpọkọ ígwè na okpomọkụ a na-eche, wee nyefee ya na njikwa PLC Ike mmepụta nke ihe abụọ ahụ na-eme ka okpomọkụ nke ntanetị ígwè dị n’ịntanetị ruo usoro nhazi. okpomọkụ.
Igwe ọkụ infrared nke atọ etinyere na ọkụ induction na-egosiputa okpomọkụ ikpeazụ nke ọkpọkọ nchara n’otu oge, ma na-enyeghachi ọdịiche okpomọkụ nke ọnọdụ okpomọkụ na PLC iji chịkwaa ike bụ isi nke ngwa abụọ ahụ iji mee ka ọ dị mma. dị iche n’ihi ebumnuche ebumnuche dị ka ụlọ okpomọkụ, oge, gburugburu ebe obibi, wdg. Mgbanwe okpomọkụ kpatara. Jiri algọridim njikwa a pụrụ ịdabere na ya na nke kachasị mma iji nweta njikwa mechiri emechi ọnọdụ okpomọkụ.
3. Usoro nhazi, ọrụ, mkpu, ezigbo oge na-emekarị, akụkọ ihe mere eme ndekọ ihuenyo ngosi chọrọ:
1. Dynamic nsochi ngosi nke ígwè ọkpọkọ na-agba ọsọ ọnọdụ.
2. The okpomọkụ nke ígwè ọkpọkọ tupu na mgbe kpo oku, ndị eserese, mmanya graphs, ozugbo curves na akụkọ ihe mere eme curves nke voltaji, ugbu a, ike, ugboro na ndị ọzọ parameters nke ọ bụla n’etiti ugboro ike ọkọnọ.
3. Ngosipụta nke setịpụrụ ụkpụrụ nke ígwè ọkpọkọ okpomọkụ okpomọkụ, ígwè ọkpọkọ dayameta, mgbidi ọkpụrụkpụ, ibufe ọsọ, ike ọkọnọ ike, wdg, nakwa dị ka oku na nchekwa nke usoro uzommeputa template ihuenyo.
4. Overload, overcurrent, overvoltage, lack of phase, undervoltage of control power supply, low cooling water pressure, high cooling water temperature, low water flow, stuck pipe and other fault monitoring display and record storage.
5. Mbipụta akụkọ, gụnyere okpokoro igwe kpo oku ọkụ, tebụl ndekọ akụkọ ihe mere eme, wdg.
4. Njikwa nhazi usoro:
Ngwaahịa dị iche iche nkọwa, ihe, na okpomọkụ ịrị elu akụkụ kwesịrị inwe kwekọrọ ekwekọ usoro uzommeputa ndebiri (nke nwere ike ji nwayọọ nwayọọ mechie na n’ezie mmepụta usoro). Enwere ike gbanwee ụkpụrụ ntọala na usoro njikwa PID na ndebiri, yana usoro a gbanwere nwere ike ịchekwa.
5. Hierarchical management of operators
Onye na-ahụ maka sistemụ, onye na-ahụ maka mmepụta, na onye ọrụ na-abanye na ọkwa atọ.